Peter RE: Herbert Mod

  • Thread starter Thread starter rockerjt
  • Start date Start date
rockerjt

rockerjt

New member
Sorry, I have no way to PM you. I just ordered a Herbert, and I like the mod mentioned here (for the +/- switch). I was wondering if this is something Uwe could do for me before it leaves his distributorship and goes to my dealer. I would like him to drill a hole for the extra jack rather than disconnecting a speaker jack if he is able. I would only do this if it doesn't void the warranty-would it? Also, would the volume levels be drasticly different between the two settings?

Thanks.

JT
 
Just call Uwe at 714 5381285.

You don´t will loose warranty. please tell that Uwe.
The differnce in volume depends on the gain setting.
On higher gain settings there is no problem.

Can we swap hairs for a Herbert ?

:yes:
 
Peter Diezel":b470a said:
Just call Uwe at 714 5381285.

You don´t will loose warranty. please tell that Uwe.
The differnce in volume depends on the gain setting.
On higher gain settings there is no problem.

Can we swap hairs for a Herbert ?

:yes:

Well, you made the hair offer after I bought the Herbert, otherwise I would have gone for that. :)

As far as the warranty, I was confused by your answer; I won't lose the warranty, or will I?

Thanks.

JT
 
So it´s more necessary for me to have a better English than more hairs.

YOU WILL HAVE WARRANTY IF YOU INSTALL THE MOD

But not in case You burn the board down :gethim:

Peter :thumbsup:
 
Peter Diezel":cdf29 said:
So it´s more necessary for me to have a better English than more hairs.

YOU WILL HAVE WARRANTY IF YOU INSTALL THE MOD

But not in case You burn the board down :gethim:

Peter :thumbsup:

OK Peter, I promise not to burn the board. :) And Don't worry; your English is just fine (and the hair is over-rated). And your amps speak an international language anyway.

Thanks much.

JT
 
Back
Top