Post your CCV questions here

  • Thread starter Thread starter glip22
  • Start date Start date
glip22

glip22

Well-known member
psychodave":2izv1bne said:
Congrats to all of the new CCV owners!!!

In an effort to help answer possible CCV questions, feel free to post your questions here in this thread and those of us that know the amp will do our best to answer them. :thumbsup:
Dave, Can't seem to locate the Pentode/Triode switch :D

:hys:
 
I'm on the 2nd Run list...
Sorry if this is a dumb question but does Channel-1 do high-gain tones as well or is it really designed as a Clean channel that can do crunch?

Thanks,
Bryan
 
psychodave":39pjorvn said:
kurtsstuff":39pjorvn said:
Do you have a new production amp Dave??

Nope. You know I dont. Why would you ask? :confused:

In case I had questions regarding the "Midi" control..The line out function...The best way to setup the effects loop return control and any of the other features your amp "doesn't" have.. :D :lol: :LOL: :D :lol: :LOL: :D :lol: :LOL:




Messin with ya.. :rock:
 
Here's one Dave,
Will my wife throw my ass out of the house if I plunk down 5K on a CCV half-stack?
 
IMG_2373.jpg
 
Do the new ccv's have the hi low power ( i know they have the full half power switch). I am referring to the note in the manual?
 
Feel free to ask me and ?s about the Midi and or loop or anything else. Pm me if needed. Or ask here.
 
Can Dave F. answer if an 8 pin midi cable is required?
Can you also give us a quick rundown of how the midi works..what channel, etc?
Thanks
 
RACKSYSTEMS":27x9q3jz said:
Feel free to ask me and ?s about the Midi and or loop or anything else. Pm me if needed. Or ask here.

rokker":27x9q3jz said:
Can Dave F. answer if an 8 pin midi cable is required?
Can you also give us a quick rundown of how the midi works..what channel, etc?
Thanks

In addition to the above question, will a Rocktron Midi Mate work? How about a Randall RF footswitch?
 
I am looking at a blow-up of the rear panel and the MIDI IN and it looks like a standard 7 pin MIDI. The MIDI out/thru is a 5 pin MIDI.

Not sure I have even seen an 8 pin and if it only controls two functions without phantom power, there is no need for something non-standard.

Do I need to see an eye doctor?


Steve
 
Back
Top