C
CrackTheSkye
New member
I have had my Tweaker for around a month with no problems whatsoever. One of the original 6v6 was blown when I got the amp (have been using 6L6) but I acquired another(Egnater branded Ruby 6v6 from a friends tweaker) and just put it in today along with the other stock 6v6 that was good. Immediately when the amp is taken off standby it starts making these static noises like hissing/popping. Kinda like frying bacon. It only does this when not playing but when playing amp seems to sound fine. I checked my cable and even unplugged the cable and it still made the noise. I wiggled the speaker cable and no change. What could be causing this noise? The 6v6 tube I put in being mismatched with the other? Bad pre amp tube? Looking for any suggestions.
I've recorded a clip with my phone in which you can hear the noise but I don't know how to post it.
I changed out all the preamp tubes with a spare I had laying around and it still made the noise with the 6v6 however I changed the 6v6 for EL34's as well as went back to the 6L6's and the popping went away but it still had a prominent hum which is probably normal. Could it just be bad power tubes or could it be something worse?
Thanks
I've recorded a clip with my phone in which you can hear the noise but I don't know how to post it.
I changed out all the preamp tubes with a spare I had laying around and it still made the noise with the 6v6 however I changed the 6v6 for EL34's as well as went back to the 6L6's and the popping went away but it still had a prominent hum which is probably normal. Could it just be bad power tubes or could it be something worse?
Thanks