Question about running Mark V with the Torpedo Live

  • Thread starter Thread starter Deleted member 16554
  • Start date Start date
D

Deleted member 16554

Guest
Here's a question for you guys, I just plugged in my Mark V into the TNTL and for some reason, only the independent channel volumes seem to affect the volume. The master volume does absolutely nothing...is that normal with the TNTL (thats not how the head functions when connected to a real cab)?

The sound coming out of the speakers is awesome and i'm happy with it, but am just perplexed by the lack of the master volume knobs doing anything. The head was just checked out and serviced so its working fine and this is not an issue i've had with my other master volume head (diezel dmoll). Any thoughts?
 
The channel MASTER knobs function for me. I'm running 45w and have Ch1 around 11:30, Ch2 around 12:30, Ch 3 around 11, OUTPUT around 11:30. Make sure you have the LOOP ACTIVE switch on/up and the OUTPUT should work. All four knobs have audible differences on my end.

One thing I did on all the TL presets was go in and up the output after the EQ. They were all at -12 and I've put them all at 0. I then adjust the TL's IN LEVEL for the output into my system. I adjust the TL OUTPUT as necessary based on the CAB/MIC placement combination of each preset.
 
yea it was the loop active switch, i turned the fx knob on the back to footswitch but forgot to flip the loop active switch up from hard bypass...thanks dude :thumbsup:
 
A proper amplifier shouldn't have more than 4-5 potentiometers and 1 jack at the input, 1 for the speaker output. :D
 
guillaume_pille":3evqozt4 said:
A proper amplifier shouldn't have more than 4-5 potentiometers and 1 jack at the input, 1 for the speaker output. :D
Click to expand...

Mark V's have more knobs than the space shuttle :lol: :LOL:
 
You must log in or register to reply here.
Back
Top