
OldGtrGuy
Well-known member
Before I post this extra long post. I have one question that could solve all of this and make every further question irrelevant.
Does having the high gain option on the KOT still allow me to access ALL of the low gain channel from start to finish? Meaning does the high gain option just provide a little extra? OR does it change the character of the pedal as well?
My name came up on the list and I have some confusion regarding the options and toggles.
I have had this pedal years ago but i cant remember exactly what settings I liked.
I use a boost in front of a high gain amp for metal tones. I am a set it and forget it type if player. I could tinker here and there with other options but typically I just need one thing from a pedal.
I will be getting the high gain option but I'm not sure if it will benefit me having it on both sides or not.
So the external toggle is essentially a secondary source of activating the internal dip switches.
Internal switch configuration:
Normal OD is on the right channel
Clean boost is on the left channel
Distortion mode is on both sides
Given that Normal OD and Clean boost are not accessible on each channel I am unsure what to do.
High gain both sides? The con here is a low gain option for tinkering around and potential resale. I'm not looking to sell but you never know.
High gain Red channel? (Right side) this is what I'm leaning towards. Balls out OD plus high gain yah!!
High gain yellow?
Just looking for some opinions.
Does having the high gain option on the KOT still allow me to access ALL of the low gain channel from start to finish? Meaning does the high gain option just provide a little extra? OR does it change the character of the pedal as well?
My name came up on the list and I have some confusion regarding the options and toggles.
I have had this pedal years ago but i cant remember exactly what settings I liked.
I use a boost in front of a high gain amp for metal tones. I am a set it and forget it type if player. I could tinker here and there with other options but typically I just need one thing from a pedal.
I will be getting the high gain option but I'm not sure if it will benefit me having it on both sides or not.
So the external toggle is essentially a secondary source of activating the internal dip switches.
Internal switch configuration:
Normal OD is on the right channel
Clean boost is on the left channel
Distortion mode is on both sides
Given that Normal OD and Clean boost are not accessible on each channel I am unsure what to do.
High gain both sides? The con here is a low gain option for tinkering around and potential resale. I'm not looking to sell but you never know.
High gain Red channel? (Right side) this is what I'm leaning towards. Balls out OD plus high gain yah!!
High gain yellow?
Just looking for some opinions.