Questions on VHX and cab

  • Thread starter Thread starter JR-OZ
  • Start date Start date
JR-OZ

JR-OZ

Active member
Hey guys as I am about to Add Another Diezel to the stable (VHX Half stack) Have questions on the VHX
Appreciate all the help you can give !


1. What is the Pre-loop?
2. Can I use a boost with it?
3. Does it take the Signal from the Loop A/B ??
4. Is it the same as slamming the front of the amp with a boost? Location in the signal flow
5. Is the Tuner Capable of having the screen on a midi controller?
6. For you low Tuning Guys Hows the Front Loaded Cab working out for you guys? Is the low end Push against your back Still there while playing on stages? I Been using Boogie oversized straight/slant cabs with old 30's for years live and want something different, Tighter, Clearer, But like that wall of air behind me.


Thanks again
 
Hi :)

1-2-3-4) Pre loop is remote switched loop wired to the input. It can be used for example to use a BOOST or any effect chain, you can have the boost always on and with a midi command (or switching presets) it could turn it automatically off.

5) Not at the moment

6) I know someone that is really happy using 412FL + G1265 + VHX with low tuning.
It may be hard to play due to the super attack but it is extremely tigh, clear and full of details.
 
Back
Top