Randall Rg 50 footswitch

[Brokenchain]

Hi all. Newbie here with a request.
Does anybody have a Randall rg 50 footswitch that they could post the schematics for the 6 pin din footswitch.
I can't seem to find anything online at all.
I have contacted Randall but no replies. I need to know what wire goes where on the din so I can wire up my own footswitch.
Thanks for any help offered.

 

[paulyc]

psychodave posted it a long time ago, it’s the same two button footswitch as the RG80 and RG100 amps I believe. There was a guy on eBay that sold ones he made also. Good luck !

 

[psychodave]

psychodave posted it a long time ago, it’s the same two button footswitch as the RG80 and RG100 amps I believe. There was a guy on eBay that sold ones he made also. Good luck !

Is it the same one? If so I’ll post some pics.

At one point I wanted to make a simple plug with a switch for the channels. The plug would just sit in the back of the amp. I got lost trying to figure out the wiring

 

[Brokenchain]

The rg50 has a 6 pin din output for a 4 switch footswitch. I've bought a Laney 4 switcher but that is 5 pin din. So I've also bought some 6 pin connectors and recievers and I'm hoping to wire it up to work for the rg.
As you mentioned, trying to work out the wiring is a task and half, I've been crossing wires to get some functions working but I don't want to do any damage to the amp. I really just want to switch between clean and gain but I'd ideally like to switch the boost on the clean also. I'm not worried about the reverb switching.