Rebel 30 Combo Vibration

[JeepGuy04]

I noticed today I have a vibration coming from the amp. I'm pretty certain it's coming from the handle on top of the combo, since it goes away when I put light pressure on the metal side and handle parts. Any suggestions on how to quite a vibrating handle? I'd say it starts vibrating when I have the volume is past 9 o clock on the clean channel with louder chord strumming.

Thanks

 

[danelectro]

My R30 combo had a buzz that turned out to be the metal vent plate on the topside of the amp. I removed the plate, put strips of foam tape along the edges, re-installed it, and the problem went away.

 

[rumblebox]

double sided tape fixes everything. lol

 

[dan desy]

I have a R30 head, so I haven't experienced it, but read about a lot of folks having vibration issues with the handle.
I don't think it's a big deal, and should be easily fixed.

 

[Anolin]

I had vibration in the handle of my Renegade combo and I just popped off the metal screw cover, used channel locks to give it a squeeze to tighten it up a bit, and I was good to go.