Renegade Head Died On Stage -- Need Schematic, Please!

  • Thread starter Thread starter stratboy69
  • Start date Start date
S

stratboy69

New member
My less-than-one-year old Egnater Renegade 65 Head abruptly lost power and died on stage at a gig last weekend (one or two "popping" sounds -- like a reverb tank being jostled -- then a swift loss of power followed by a distorted descent into silence). I checked the main fuse and the power tube fuses (visually and with a multimeter) and they were OK; the pilot lights remained on; the power tubes (Tung Sol 7581's) were also lit up and otherwise looked OK and the bias for each pair read at about 60mV, having drifted a bit South from where I'd set it at 66 mV. I've taken the head to my tech (Doc Electro, Jeffersonville, IN) and he says it's not a tube problem, but, preliminarily, a power supply issue and he needs a schematic.

I e-mailed EGNATER 5 days ago with no response -- would someone be so kind as to provide me with a schematic? Thanks much in advance.


Stratboy69
Louisville, KY
 
You must log in or register to reply here.
Back
Top