R
rustyshed
New member
Hi everyone,
I have a Renegade head, Matrix gt800fx amp, Digitech GSP1101 and a Rjm Rg16.
I am trying to set up a W/D/W setup using the renegade as my dry sound and tapping off a signal to the GSP1101 and onto the matrix stereo amp for my wet sound.
Here is my signal chain: (using the Gsp1101 in the 4 cable method)
Guitar - Rg16 Buffer -- Gsp1101 -- Renegade Head--- FX Loop send---Rg16 loop 5 In---Rg16 Loop 5 Out --- FX Loop Return.
Rg16 Loop 5---Gsp1101 (4 cable method)---gsp1101 left & right outputs --- Matrix gt800fx.
The problem I am getting is a squealing noise in the renegade head dry cab, I use hum eliminators to avoid ground loops so I am a little puzzled to what this could be.
Any suggestions?
Thanks in advance,
I have a Renegade head, Matrix gt800fx amp, Digitech GSP1101 and a Rjm Rg16.
I am trying to set up a W/D/W setup using the renegade as my dry sound and tapping off a signal to the GSP1101 and onto the matrix stereo amp for my wet sound.
Here is my signal chain: (using the Gsp1101 in the 4 cable method)
Guitar - Rg16 Buffer -- Gsp1101 -- Renegade Head--- FX Loop send---Rg16 loop 5 In---Rg16 Loop 5 Out --- FX Loop Return.
Rg16 Loop 5---Gsp1101 (4 cable method)---gsp1101 left & right outputs --- Matrix gt800fx.
The problem I am getting is a squealing noise in the renegade head dry cab, I use hum eliminators to avoid ground loops so I am a little puzzled to what this could be.
Any suggestions?
Thanks in advance,