sixstrings
New member
If I only want to use the 6L6 or EL34 side of the blend knob, could I replace the tubes with a quad of the same type? Like run all 6L6's or all EL34's?
Resonant Alien":19ac2dom said:Yes, you can do all of the above. I currently have KT66 in one side and TS 5881s in the other. At one point, I was running 6L6GC-STRs in one side and 6L6-WGCs in the other. At one time, I also had two different types of EL34s. As long as you bias it correctly according to the rating of the tube, you're good.
That said - running a quad of the same power tube in the Renegade isn't going to really do much for you. You'll get about 15W more power by running Tube Mix in the center versus fully to the "6L6" or "EL34" sides. You're not going to get the 100W you get with standard type amps that use a quad - you'll get 65W versus about 50W that you get in the fully left/right positions. So, I would be more inclined to run two different pairs of 6L6s - that way you can blend the sonic characteristics of both.
sixstrings":32lbc8q5 said:I wasn't thinking of doing it for the extra power, but I like the sound of a quad set of tubes when the volume is up. Have you tried KT77's in the Renegade yet?
just42dave":1j2xpclc said:fkin awesome amp
just42dave":1rg92ps3 said:fkin awesome amp