Replacement Herbert LED's

[SpicedMuffin]

I know its has probable been said before on the board but my Ch. 2 LED just burnt out how do i go about getting a replacement?

 

[Peter Diezel]

Please call Uwe Salwender at 714 5381285

Thanks,

Peter

 

[SpicedMuffin]

thanxs Peter

 

[DiezelMonster]

Peter

if the LED is burnt out or just to spice things up a bit, can they be changed out to a different colour? like say green?

I saw a herbert with a green power switch and want that, but since the herbert is perfect otherwise, Id like to put eh same intensity leds as the blue ones, but in green! hahaha

anyhow, just a pipe dream

thanks!

C

 

[Jaymz82]

I read somewhere that for some reason (I think it was the quite high voltage) only those special blue LEDs work. Any other colored LED would blow very fast if not right away.

 

[Peter Diezel]

You can use any standart 5 mm LED. Should stay 20 milliamps minimum.

 

[Rob Tahan]

I had the same problem and had it replaced with a red one because i couldnt find a blue one. Blue looks so much cooler. Wish i could get one and find someone to switch it out again....