Rig Pics

dfrattaroli

dfrattaroli

New member
I know I've talked about my rig a bit but I'm finally posting some pics. I've got to wire it properly but it's all working right now. I'm considering doing a w/d/w with the M4 in the Lonestar's loop and the VHT for my wet. I'm currently just using it as 2 separate rigs: M4/GMaj/VHT/CAA cabs and Lonestar/Bogner cab.

Dave

gear_1.JPG


gear_2.JPG


gear_3.JPG


gear_4.JPG
 
Dave, that is one tidy rig - love it.
Are the Custom Audio's your stage monitors? And I've never seen a rack mounted Lonestar before. Did you remove it from the head?

The Bogner 2x12 is a great cabinet. I've heard a lot of really good demos with that cab with an Ecstasy. How does it compare to Egnaters?
 
bscfo1":1cgwyccr said:
Dave, that is one tidy rig - love it.
Are the Custom Audio's your stage monitors? And I've never seen a rack mounted Lonestar before. Did you remove it from the head?

The Bogner 2x12 is a great cabinet. I've heard a lot of really good demos with that cab with an Ecstasy. How does it compare to Egnaters?
Click to expand...

Thanks. I don't gig so this rig won't move from where you see it. At least I don't have plans to gig right now. I think I just came up with a cool wiring scheme to run and switch both the M4 and Lonestar Preamp section through the Lonestar power section while using the VHT and GMajor for my wet signal. So it'll be w/d/w with the Bogner getting the dry and the CAA cabs getting the wet.

I've never used any Egnater cab other than the 4x12 TM and contrary to what many folks (outside this bbs) have said about it, I really liked it. The Lonestar used to live in a 2x12 combo but Mesa just started making rack kits for their flat face chassis' like the Lonestar, Express and I believe the Stiletto.

Dave
 
EWSEthan":3prhk854 said:
Nice rig! :) Are you using the CAA cabs for monitors like Luke?
Click to expand...

At them moment, they are stereo cabs for the Egnater/GMaj/VHT. The Bogner is for the Lonestar. But I'm going to wire it up as a w/d/w where the M4 and Lonestar preamps will be switched through the LS power amp and the VHT/GMajor will take over as a wet signal to the CAA cabs. One tidy w/d/w rig.
 
You must log in or register to reply here.
Back
Top