Share some Furman PQ-3 / PQ-6 settings

  • Thread starter Thread starter MrDan666
  • Start date Start date
MrDan666

MrDan666

Active member
In the front end, boost the 800-1000hz by about 15-20dB with bandwidth around noon or a little less. I cant remember what i have the other two bands set for, but they're only boosting like 5dB or so.

Gives a great Aldrich/Sykes type boost!! Especially with the Boogs :rock: Just remember to use a Hush after it when boosting the front end. and always use the Low level inputs/outputs on the PQ.
 
psychodave":1azcv9l9 said:
I have been tinkering around with a PQ-6 I got from Juggernaut and it is really cool. I have gotten some really great tone from it with my Boogies and Marshalls. Anyone care to share some settings...both in front and in the loop? :thumbsup:
Click to expand...

If you want to dick around with a Stryper or Dime like tone use the EQ in front of the loop.

Plug the guitar into the low level i/p and the low level o/p goes into a hush then into the front end of your amp. You will only need 3 bands of EQ. Low mid and high.

Set the low freq on the pq for 50-100hz at a narrow bandwidth(all the way left) With a cut on the EQ (equalization knob turned all the way left)

Set the Mid Freequency to 800hz for old stryper or 1000hz for newer lol! Narrow bandwidth and EQ boosted +20db (eq knob all the way to the right)

Set the high Freq to 2000hz at a broad bandwith!! and the EQ Boosted +20db (eq knob all the way to the right)

Crank the level knob to about 8 on the eq

Set the boogie with a drastic v pattern EQ and slam the front end with the EQ and laugh your ass off!! :rawk:

~R~
 
Randalls159.jpg



Dimes settings......... :thumbsup:
 
Juggernaut":1cszowt8 said:
Randalls159.jpg



Dimes settings......... :thumbsup:
Click to expand...



im gonna go try this right now. didnt he use the mxr in front with the pq3??
 
Juggernaut":3d1oaejl said:
Randalls159.jpg



Dimes settings......... :thumbsup:
Click to expand...

Very cool!! I've tried those settings on the boogie and its more geared towards the randall. It didn't really work on the boog. I think dave will piss himself though when he tries both though :hys:
 
holy shit, that sounds amazing!! metalzone--->pq3---century200. i could get pretty close to dimes tone before but that is it to a T. i always put the pq3 in the loop. im gonna go try the same thing with my ampeg.
 
You must log in or register to reply here.
Back
Top