RockStarNick
Active member
For those that have done the footswitchable MODE mod on your Shiva, I'm sure you're aware that the Green LED is very dim. (The existing "Reverb" switch on the footswitch.
I figured out a fix:
Replace the 100 Ohm Resistor (Positive leg of Green LED) with a IN4728A Diode (just like the Red LED for the "Channel" switch.)
Just be careful removing it from the board. Took me 5 minutes, and now the Green LED is just as bright as the others.
You're welcome. NOW GO CONTINUE ROCKING.
I figured out a fix:
Replace the 100 Ohm Resistor (Positive leg of Green LED) with a IN4728A Diode (just like the Red LED for the "Channel" switch.)
Just be careful removing it from the board. Took me 5 minutes, and now the Green LED is just as bright as the others.
You're welcome. NOW GO CONTINUE ROCKING.