Boomer
New member
... my Mod 50 and matching THD 212 loaded with Golds.
jmgman69
New member
WOW!!Looks fucking cool ,man!!!!
Len Rabinowitz
New member
Fabulous- Looks great! What is sitting on top?
Boomer
New member
The brown box is a Fuchs Plush Verberator that makes the stock F/X loop tube buffered and adds a further F/X loop. It's probably best if I let Fuchs explain:
Unlike other “tube pedals,” the Tube FX Loop™ features a power supply with a unique regulated switching technology that takes the incoming 9 volts and converts it up to the optimal 300-Volt high voltage a tube really needs to operate best. In addition, a precision 6-volt DC regulator provides consistent DC power for the tube filament assuring lowest noise and consistent performance despite any changes to incoming line voltage. It can also be used as a tube buffer to convert an incoming high impedance signal to a low impedance for long cable runs or driving a pedal board. The recovery (gain) stage can be used to boost the level of a guitar or pedal board with a true tube audio stage. It provides a warm sweet utility gain stage with a multitude of uses. The Tube FX Loop™ features a unity gain cathode follower to work with any amp that has passive preamp output - power amp input patch jacks, and not a true active effects loop like Ceriatone, Dumble, Bludotone, Brown Note, Quinn, and many other amps. It has a send level control and high headroom. The return portion of the loop features a high impedance input (250-K) and a low output impedance (5-K) with its own level control as well. The loop can be run in series or parallel modes, and features a level adjust switch for rack or pedal style effects.
The other pedal is a Sonic Research Turbo Tuner ST-200.
Unlike other “tube pedals,” the Tube FX Loop™ features a power supply with a unique regulated switching technology that takes the incoming 9 volts and converts it up to the optimal 300-Volt high voltage a tube really needs to operate best. In addition, a precision 6-volt DC regulator provides consistent DC power for the tube filament assuring lowest noise and consistent performance despite any changes to incoming line voltage. It can also be used as a tube buffer to convert an incoming high impedance signal to a low impedance for long cable runs or driving a pedal board. The recovery (gain) stage can be used to boost the level of a guitar or pedal board with a true tube audio stage. It provides a warm sweet utility gain stage with a multitude of uses. The Tube FX Loop™ features a unity gain cathode follower to work with any amp that has passive preamp output - power amp input patch jacks, and not a true active effects loop like Ceriatone, Dumble, Bludotone, Brown Note, Quinn, and many other amps. It has a send level control and high headroom. The return portion of the loop features a high impedance input (250-K) and a low output impedance (5-K) with its own level control as well. The loop can be run in series or parallel modes, and features a level adjust switch for rack or pedal style effects.
The other pedal is a Sonic Research Turbo Tuner ST-200.
jkdsteve
Active member
Nice cosmetics! A great amp and now unique looking!
jlbaxe
Banned
Active member
nice luv the different look. i was thinking of doing a different head and cab look. that is sweet.
Chris R
New member
Looks great. How do you have the Fuch's hooked up? I have been looking at that pedal for sometime now.
aeroic
Active member
Looks killer man!
Boomer
New member
I currently have it running through the Parallel loop so the Effects control on the front panel is active. It works in either loop.Chris R":1t823u45 said:
3 Mile Stone
New member
What modules and how do those sound through the C Golds?
Boomer
New member
I have a Bman, Vmax and SL2 (about to be an SL2x).
The speakers are brand new so I hesitate to make any statement or draw a conclusions until they have 30-50 hours on them.
The speakers are brand new so I hesitate to make any statement or draw a conclusions until they have 30-50 hours on them.
3 Mile Stone
New member
Right on, ley it wail for a while to ware some of the ruff edges off. Let us know?
Fallout Labs
New member
looks cool.. hope you got nice cases for that 
first gig and you'll have a tear
first gig and you'll have a tear
Boomer
New member
Cases? No. I don't plan on much heavy gigging. I did order double padded 'Studio Slips' covers for them. The head cover came about the same time as the head. The cab cover should be here this week.
