A
artiewylde
Member
Wondering if anyone here could answer this....I have a 312 speaker cabinet with 3 16 ohm speakers in parallel making it 5.33 ohms. What do I set the amp at? 4 or 8ohms?
psychodave
Well-known member
I’d use 4. Not sure 8 would be bad though. It’s so close. Most 16 ohm speakers are 13 ohm anyway. So your still 3 ohm off.
C
Cap217
Active member
Measure the actual impedance with a multi meter. But I’d use 4.
N
Nigel
Guest
Either are fine, and will shift the frequency response. See which one gives the best tone/eq for the room and volume level.