Suhr Standard Aldrich Neck pickup keeps cutting out..

[cyndicate]

Assuming I've been soldering right, my Neck pickup has been cutting out every once in awhile. The thing is it works sometimes, and when I switch between neck/bridge a few times it cuts out. At times it stays on the whole time I play. I'm pretty sure all the connections are soldered correctly since they aren't loose or anything.

I recently installed a new 5 way super switch from Stew Mac and wired it following this diagram in hopes of fixing it.

https://www.seymourduncan.com/support/wi ... _super5way

Could it possibly be a user error or can the neck pickup have something wrong with it? I have tried resoldering the connections about 3 times now, and the problem still exists.. Not sure what I am doing wrong. I'll try to post a pic of the electronics tonight maybe I am doing something stupid. I've swapped pickups on a ton of guitars and never had any problems but this one the problem came up about a month after I bought the guitar new.

This is the guitar in question

 

[projectx102]

Assuming I've been soldering right, my Neck pickup has been cutting out every once in awhile. The thing is it works sometimes, and when I switch between neck/bridge a few times it cuts out. At times it stays on the whole time I play. I'm pretty sure all the connections are soldered correctly since they aren't loose or anything.

I recently installed a new 5 way super switch from Stew Mac and wired it following this diagram in hopes of fixing it.

https://www.seymourduncan.com/support/wi ... _super5way

Could it possibly be a user error or can the neck pickup have something wrong with it? I have tried resoldering the connections about 3 times now, and the problem still exists.. Not sure what I am doing wrong. I'll try to post a pic of the electronics tonight maybe I am doing something stupid. I've swapped pickups on a ton of guitars and never had any problems but this one the problem came up about a month after I bought the guitar new.

This is the guitar in question

Post a pic of the electronics cavity.Maybe a ground wire is touching a hot connection intermittently.

 

[cyndicate]

I'm just gonna take it apart and have someone look at it, after looking it over I think I fucked up

 

[Valtiel]

Sounds like a it could be a bad switch. There arent really many spots in the wiring of a pickup that would cause intermittent problems, if their are problems in the pickup usually it just stops working all together. I would definitely have a tech check out the switch.

 

[cyndicate]

Sounds like a it could be a bad switch. There arent really many spots in the wiring of a pickup that would cause intermittent problems, if their are problems in the pickup usually it just stops working all together. I would definitely have a tech check out the switch.

Thats what I thought at first, ,and I replaced the switch, I'll just take it to someone who has more knowledge so I don't mess it up any further