TimeFactor/Mod50 effects loop is killing me

[Wagster]

I'm still getting clipping with my TimeFactor in the parallel loop of my Mod50. I have the TimeFactor set to the line level setting with the killdry activated. I'm not even running the preamp volume all the high. I set it loud enough to cover my gigs. Any ideas on what I can do to eliminate the clipping?

 

[Wagster]

Anyone?

 

[Chris R]

Sorry Wagster,

Same issues with all digital gear for me too... Ebtech LLS is the next thing I would try.

 

[Wagster]

The loop must send a very hot line signal. You would think the TimeFactor could handle it. It's only on the Vintage delay that give me issues. I have it set to the highest bitrate,. I'm using the digital delay with good results. One set at 800ms and the other at 430ms. Big as a house.

 

[Doubleneck]

Sorry brother,

I'm not familiar with the TimeFactor.

I'm using a TC G-Force (using kildry as well) with parallel effects loop and have no clipping issues?

 

[sumis]

i use a TF with my mod50. have no problems. i do run my channel masters kind of low: 12 o'clock for the lead sound on a higher gain module, and like 10 o'clock for rhythm's (i use the BMAN a lot, which is run hotter to compete with my dirt modules though.

either way: noon on an EG3/4/5 should not clip the TF. if so, run them even lower. imho the mod50 really need to get the power amp cooking to do it's thing anyway.

.