guitarnate2000
Well-known member
A few years ago, I tripped over a $100 Mogami cable and tore the 1/4 tip straight off. I cannot begin to tell you guys how many times this has happened, due to carelessness like leaving my cables on the floor instead of putting them away. I envisioned something to make it easier to hang my guitar cable up and that is how this all started.
I drew out a couple of sketches and figured out what I wanted to do. Once I had the design it was then a quest of building a few prototypes. A friend of mine helped me by investing some money to help me get started. I bought a 3D Printer and started banging away to what you see now.
The name of my company is Cable Save
I secured a patent, did a couple trade shows and then I got very sick as some of you know.
At the request of my kids and wife, I am going to move forward with my ideas.
The unit for amplifiers or your recording desk is attached via Velcro or a screw if you want. (one is included) you simply drop your cable in and the bottom support keeps it secure until you lift it out.
The other unit is designed for microphone stands. same principal applies. drop the cable in and lift it out.
I suppose my claim to fame is they are used by Paul Gilbert, Dweezil Zappa, Buddy Miles, Buddy Guy and a few others. Bill Webb, a pretty famous amp builder in Austin tours with the Jimi Hendrix Experience Road show.. He has all the guitarists on that tour stocked with these. Scott Dalhover from Dangerous Toys, Phil X and Andy Timmons also have them and use them in their studios and whatnot..
While I ramp back up, I would like to offer to any one of you willing to pay 2 dollars shipping. I will send you all one of each of these. all of my products are made and packaged at my house by me and my family.
I am working on some new designs but still have quite a few from my first batch. All I ask is you spread the word to others if you like them. if you need more than one of each, just let me know. I will send you guys however many you need within reason. the $2 is just to cover shipping.
here is a story that Airwolfe 3D Printers ran on me a few years back
https://airwolf3d.com/2019/07/04/ca...inging-product-market-additive-manufacturing/
I drew out a couple of sketches and figured out what I wanted to do. Once I had the design it was then a quest of building a few prototypes. A friend of mine helped me by investing some money to help me get started. I bought a 3D Printer and started banging away to what you see now.
The name of my company is Cable Save
I secured a patent, did a couple trade shows and then I got very sick as some of you know.
At the request of my kids and wife, I am going to move forward with my ideas.
The unit for amplifiers or your recording desk is attached via Velcro or a screw if you want. (one is included) you simply drop your cable in and the bottom support keeps it secure until you lift it out.
The other unit is designed for microphone stands. same principal applies. drop the cable in and lift it out.
I suppose my claim to fame is they are used by Paul Gilbert, Dweezil Zappa, Buddy Miles, Buddy Guy and a few others. Bill Webb, a pretty famous amp builder in Austin tours with the Jimi Hendrix Experience Road show.. He has all the guitarists on that tour stocked with these. Scott Dalhover from Dangerous Toys, Phil X and Andy Timmons also have them and use them in their studios and whatnot..
While I ramp back up, I would like to offer to any one of you willing to pay 2 dollars shipping. I will send you all one of each of these. all of my products are made and packaged at my house by me and my family.
I am working on some new designs but still have quite a few from my first batch. All I ask is you spread the word to others if you like them. if you need more than one of each, just let me know. I will send you guys however many you need within reason. the $2 is just to cover shipping.
here is a story that Airwolfe 3D Printers ran on me a few years back
https://airwolf3d.com/2019/07/04/ca...inging-product-market-additive-manufacturing/
Last edited:
