Trop Live: Using the thru

  • Thread starter Thread starter riffwraith
  • Start date Start date
R

riffwraith

New member
Hi

Have a Torpedo Live. Head speaker out > Torp speaker in. Torp line out > DAW

While leaving the above in tact, can I use the Torp's thru to send the Torp op signal to the input of another amp? If so, do I have to worry about ohms?

Thanks in advance.
 
Do not do this, the thru is a speaker level signal and plugging it into another amp input could damage one or both amps.

The thru can be connected to a speaker which bypasses the load but allows the Torpedo to provide an emulated signal to the line output.

If you also need to run to another amp, best to use a splitter at guitar level using a proper device for the application like a Lehle P Split or a littlelabs PCP, If your amps have enough gain, a y cable can work and another great hack is a stereo pedal like a chorus (in bypass, if you want)
 
Do not do this, the thru is a speaker level signal and plugging it into another amp input could damage one or both amps.

Ah see - this is why I ask.

Ok, will have to look into splitting the signal. Thank you!
 
You must log in or register to reply here.
Back
Top