Tube layout for the Egnater designed Randall RT2-50

  • Thread starter Thread starter Scott Peterson
  • Start date Start date
Status
Not open for further replies.
S

Scott Peterson

New member
I would like to know the tube layout for the RT2/50 so I don't have to pull it out of the rack and take the top off just to see. I know what power tubes are channel a/b; I would like to know which is which amongst the three preamp tubes. I assume the two outside ones are the phase inverters and the middle one is for the EQ/gainstaging?
 
The middle one is split with 1/2 for each (L & R) input stage so it is common to both channels. The rest is correct Scott.
 
Status
Not open for further replies.
Back
Top