Using a Minimix I with a Chandler SDE...?

[wc8485]

Would just like to run this by you guys to make sure I've got my setup right for this implemenntation. Just got the Minimix and not had a chance to wire it up yet.

FX unit is a Chandler SDE, no programming only the knobs on the front for adjustments.
The outputs on the Chandler are; Left Mix, Right Mix, Delay out and Dry out.
The Delay Out, output is described as just that "Sends only the delayed signal to source".

I'm thinking I will need to set the Mix on the Chandler to 100% and use the delay out to send it to the Minimix.

Is this the best way to set and run the Chandler to the minimix?

Thanks for the assistance,
Bill

 

[Ed Yoon]

Yes, you'd want to use 'Delay Out' only and that signal will travel parallel with the amp's dry signal through the MiniMix.

 

[wc8485]

Thanks man!

Mucho Gracias...