Using g system with diezel d-moll and vh4

[cameron711]

I need some routing help!

I have a diezel d-moll and vh4. I have a rack ISP decimator prorack g stereo and a tc electronic g system.

Us there any way to have both wired up thru my effects and switch between the 2? Any ab/y boxes that can work?

I prefer to run one at a time thru my 4x12 diezel cab and switch between the two, but any other suggestions where I can switch between the amps without shuffling a ton if cables would be great!

Thanks guys!

 

[steve_k]

The biggest problem for you is you need something to switch heads into one cab, while maintaining a load on the head that is not selected. Surprisingly enough, there aren't that many commercially available products for that. I've been down this road before, and you have a few options:

1) Egnater SS4 Switcher (4 in/1 out). These aren't produced anymore.

2) Radial Engineering Head Bone. You can purchase these at most online retailers.

3) Get Bob Bradshaw (Custom Audio Electronics) to make you up a head switcher.

4) Keep an eye on ebay for Eggie or Bradshaw gear.

Then, routing will be made easier. However, you will also a looper/switcher of some sort. Again, Bradshaw which can custom build this into one box for you. Or, RJM, Digital (Voodoo) or other commercially available rack product. It's a lot of work though.

Steve

 

[cameron711]

sweet! cant wait to try it out, got a radial head bone vt for cheap!