VH4 and 412RC Vintage 30

[AndyP]

Hi
I would like to know where I have to plug in the cable from the VH4 to the Box.
I have many options, but I couldn't find out, where it has to be plugged in.
The Box has 16 Ohm impedance an the VH4 has 4 outputs. So please help me

And maybe someone could explain his decision to me.

Thanks in advance !

 

[Jaymz82]

Use the 16 Ohm out of the amp with the 16 Ohm in of the cab. That's it.

 

[AndyP]

But someone told me to use the 2x16 Ohm input.

I'm confused

 

[Jaymz82]

I just checked the Diezel Website and my local guitar store website. The 4x12 cab can be used either 8 Ohm Mono or 16 ohm stereo. It should like this:

In that case you should use one of the 8 ohm out on the vh4 (there are two) and connect it with the 8 ohm in of the cab.

 

[AndyP]

So I have the free choice between 1x8 and 2x16.
But is there any difference between 2x16 and 1x8 ?

The 2x16 is stereo, and that's why 1x8 mono could be better ?
Plug in Side A and on the VH4 into 2x16 or 1x8, right ?

 

[Jaymz82]

There is no difference here because the VH4 is a mono head. Well, one difference, you need two cables

Concerning the connection: The VH4 offers the following possibilities.

1x 16 Ohm Cab --> 16Ohm OUT
2x 16 Ohm Cabs --> both 8 Ohm OUTs
1x 8 Ohm Cab --> one of the two 8 Ohm OUTs
2x 8 Ohm Cabs --> both 4 Ohm OUTs
1x 4 Ohm Cabs --> one of the 4 Ohm OUTs

 

[AndyP]

1x16 Ohm cab to 2x16 input or 1x8 input. It doesn't matter which of these two inputs I choose, right ?

 

[Jaymz82]

You've got it wrong

16 Ohm cab with 16 Ohm Output. If you use TWO 16 Ohm cabs, than use the Outputs for 1x 8 Ohm oder 2x 16 Ohm

 

[AndyP]

Anhand deines "oder" konnte ich erkennen, dass du deutsch verstehst ;-)

Also ich hatte bis jetzt immer den Anschluss in der Box Side A und im VH4 2x16 drinnen.

Und jetzt verwirrt mich das ganze Zeug:
I just checked the Diezel Website and my local guitar store website. The 4x12 cab can be used either 8 Ohm Mono or 16 ohm stereo. It should like this:

Und ich hatte das bis jetzt Side A und 2x16 drinnen
Darunter ist beim VH4 der 1x8 Anschluss.

Von der Box aus immer von Side A, da es ja mono gehört, nur in den VH4 2x16 oder 1x8
das ist meine Frage.
Es gibt noch einen einzelnen 16 aber den schrieb noch keiner an.

 

[petereanima]

du musst vom "1x8ohm" output des amps in den mono-"1x8ohm" eingang der box, also side A - dann passt alles.

 

[Jaymz82]

Und ich hatte das bis jetzt Side A und 2x16 drinnen
Darunter ist beim VH4 der 1x8 Anschluss.

Die missverstehst da etwas. Die beiden Outputs gehören zusammen. Du kannst entweder eine 8 Ohm Box an einen der beiden anschließen oder zwei 16 Ohm Boxen an jeweils einen.