VH4/VHT Pitt UL - GCX/GCP Config/HELP!!

  • Thread starter Thread starter Flavatrocious
  • Start date Start date
Flavatrocious

Flavatrocious

Active member
Hey-

Does anyone know if i can run the VH4 and the VHT pitbull UL in conjunction with the voodoo lab stuff. I want to be able to channel switch and run pedals and of course use both amps at the same time. Is this possible?

If anyone does this or knows if it wont work then please let me know.

BTW... these 2 heads together rock in the sickest of ways!! :rock: :rock:
 
Absolutely....you can do it all with a GCX Switcher and Ground Control Pro. The VH4 of course changes channels via Midi. So, from the Midi controller into the GCX then out from the GCX to Midi of the VH4. Takes care of the VH4 switching. The GCX has 8 loops. If the VHT switches channels with 1/4" plugs, then you are set. You will need a Y cable to go in to two loops and out from the sends of two loops to each head. This is so each amp will always see a load. While you are at it, since the switcher is rack mounted, you can also use the GCX to control you effects. I put all the effects in front of the VH4 and send to the Uberschall dry. You can run the effects to both if you want. Programyou channel changes in for both amps omps bypassed, effects in or whatever. You can use the channel inserts on the VH4 or go with the parallel loop with effects if you want. Takes a little bit to figure out the Midi controller, but it is quite versatile.

Steve
 
Duolos":3kg3x9le said:
Not a problem to do this. :thumbsup:

Hey Terry, Hows it going?

Its Paul from San antonio. I spoke with you the other day about the new front loaded cabs.

Just so everybody knows, Terry and his staff are
wonderful to deal with. Owning and buying Diezels here in the U.S is going to get alot better.
 
Flavatrocious":3ebqkp51 said:
Duolos":3ebqkp51 said:
Not a problem to do this. :thumbsup:

Hey Terry, Hows it going?

Its Paul from San antonio. I spoke with you the other day about the new front loaded cabs.

Just so everybody knows, Terry and his staff are
wonderful to deal with. Owning and buying Diezels here in the U.S is going to get alot better.

Oh! Hi Paul!!!

It is wonderful to learn who you are here. I very much enjoyed talking with you the other day. It is always great to to learn these things. How did you like that speaker?
 
Duolos":292urd4d said:
Flavatrocious":292urd4d said:
Duolos":292urd4d said:
Not a problem to do this. :thumbsup:

Hey Terry, Hows it going?

Its Paul from San antonio. I spoke with you the other day about the new front loaded cabs.

Just so everybody knows, Terry and his staff are
wonderful to deal with. Owning and buying Diezels here in the U.S is going to get alot better.

Oh! Hi Paul!!!

It is wonderful to learn who you are here. I very much enjoyed talking with you the other day. It is always great to to learn these things. How did you like that speaker?

Haven't had the chance to go get it yet but will do soon! :rock:
 
Riddick":9g2tbjur said:
Paul,

You have the sickest rig in the south! :rock:

Allen

Could'nt have done it without you Allen, thanks again!! You totally :rock: :rock:
 
Back
Top