Voltage Regulator Recomendation for Herbert in the US?

[zakmetal]

Hey Guys,
I am interested in buying a voltage regulator/power conditioner for my rack that I can connect my Herbert to. I live in the US so that is that voltage range that I am working with. I need the unit to be 1u, cannot do (or probably afford a 2U unit).
What is the preferred voltage for the Herbert? What units have you guys used that you would recommend?
Thanks in advance bros!
-Zak-

 

[King Crimson]

Furman PL-Plus C POWER CONDITIONER with VOLTMETER

 

[zakmetal]

Furman PL-Plus C POWER CONDITIONER with VOLTMETER

But is this a Voltage Regulator? It seems to only allow me to see the incoming voltage. I am looking for something along the lines of Furman P-1800 AR, AR-1215, or AR-15 II, but I wanted to see if anyone suggests anything else. Great looking unit though and if it does regulate voltage I would buy it.
Thanks,
-Zak-

 

[Anonymous]

Furman P-1800
The 15 Amp P-1800 AR delivers a stable 120 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1800 AR accepts input voltages over a wide AC voltage range and transforms it to a constant output of 120V, ±5V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.

Additionally, the P-1800 AR is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furman’s Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.

 

[King Crimson]

Furman PL-Plus C POWER CONDITIONER with VOLTMETER

But is this a Voltage Regulator? It seems to only allow me to see the incoming voltage. I am looking for something along the lines of Furman P-1800 AR, AR-1215, or AR-15 II, but I wanted to see if anyone suggests anything else. Great looking unit though and if it does regulate voltage I would buy it.
Thanks,
-Zak-

Zak I gaurantee you that thiks is more than enough unless you've got more than 8 rack fx.

 

[zakmetal]

Thank for the help guys. I am exclusively looking for a voltage regulator and not simply a power conditioner. Like I said, I am familiar with the Furman P-1800 AR, AR-1215, or AR-15 II, but just wanted to see if there were any others out there that anyone has used. Looks like I will probably go with the AR-1215.
Thanks,
-Zak-

 

[Anonymous]

This is the only other one that I have found.
http://www.newegg.com/Product/Product.a ... 65401&SID=