What Vol. pot is used on the Modern? Mine pooped on me:(

[tripstan]

Somehow my volume knob's shaft came loose from the nut housing, so mid-set I go to turn up a lil' bit and my knob comes flying off and the shaft sinks all the way down . It was a cool imprompt to Kill switch for a moment but very very strange. . .anyway what is standard volume pot used on the Modern?

 

[Suhr]

Somehow my volume knob's shaft came loose from the nut housing, so mid-set I go to turn up a lil' bit and my knob comes flying off and the shaft sinks all the way down . It was a cool imprompt to Kill switch for a moment but very very strange. . .anyway what is standard volume pot used on the Modern?

PLEASE PLEASE use email for support !

I cant believe this ! do you have a picture?
Sounds like the back of the pot was hit or was pushed down too hard. In that situation the back of the pot could be pushed off. You can push it back on a recrimp the tabs and it should be OK
What is the serial number? We can take care of this for you if you dont want to deal with it.

 

[tripstan]

PM sent to Suhr's website. Thank you

 

[glip22]

John and Company are as good as it gets.

 

[Suhr]

Send me an email direct with your info and location
If these are the barrel knobs what I said is what happened and if you look at it you can just push the tabs crimps back down but you have to remove the pot to see them.
Either way we will take care of it but use my email, John @ suhrguitars .com

 

[tripstan]

Thanks for the advice. The tabs came loose that hold the pot plate down, so it was a really quick fix once the pot was out. Your barrel knobs are dang sweet and y'all are top notch! Pretty sure it was from changing Vol. knobs a lil too much. Pot still works great! And +1 to glip22. . . . Suhr Inc. is as good as it gets!

 

[tripstan]

Unbelievable service! BTW, I'm running my Modern>100watt Diezel Einstein>2x12 with G12-65's which equals IMO those two companies have the BEST customer service, Hands down!