XTC 101b making POP noise?

[always-ultraman]

I'm not sure if this has happened all the time on my amp or if I just discovered it. Could somebody please confirm if your XTC 101 does hearable POPs when doing the following:

- change "structure" setting when red or blue channels are in use
- change "boost" setting of the green channel when green channel in use
- change the "pre eq" settings of the green channel when it's in use
- switch from green to red/blue and back using the buttons in the back of the amp

Can you hear any "pop"s too? I thought a coupling cap could be leaky but it took all out and tested them with 320V, but zero leakage down to 0.00 micro amps.

Can anybody confirm?
Thank you!

 

[_actual time_]

I'm not sure if this has happened all the time on my amp or if I just discovered it. Could somebody please confirm if your XTC 101 does hearable POPs when doing the following:

- change "structure" setting when red or blue channels are in use

yes on a pop when switching the Structure. that circuit switch has some caps in it, so my guess is that they're just discharging some stored charge.

your situations when using the green channel, i don't know; i don't use the green channel as much. i don't think i've ever heard a pop when cutting the Boost on or off, but i can't be certain.

the folks at Bogner are great with email questions; you might hit them up.

 

[pedal builder]

im getting pops when i turn the fx loop on or off