Recent content by veets987

Man there is a lot of bitter childish folks in here. Even if you don't like their music doesn't mean they arent both great songwriters. John Mayer is a great player! I feel like I'm reading comments from a bunch of high school boys who are just pissed off they cant get laid and just hate...

Please delete if this is not allowed... I have my Runt 20 listed in the Classifieds.. $1000 shipped viewtopic.php?f=6&t=208672

$1000 shipped Friedman Runt 20 Head with double padded StudioSlips cover! Includes original box, and all accessories (power cable, foot-switch and foot-switch cable) The StudioSlips cover is double padded with a strap. This cover cost me $98 shipped and took about 5 weeks to receive since...

Anyone have theirs modded? Besides the foot-switchable boost, what other mods can be done and what do you guys recommend?

very good chance that it is the Power Transformer (or Output Transformer, cant remember). I had this exact thing happen on my Renegade years ago and had to have the Transformer replaced.

This was something i was curious about as well. Particularly if you can make the boost footswitchable? Also the possibility of adding a density knob (similar to how the egnater renegade's density knob works to add deep lows to help beef up your tone at lower volumes)

I have had this issue since ive had it. I usually only notice it if it has been in cold temperatures for a while before i turn it on. It usually only lasts about 30 seconds and then subsides.

INSIDE the amp chassis of the Renegade is a very tiny 15dB push switch for the loop, the amp's ship with the switch in the down position i believe. This can help with line level pedals vs instrument level pedals. Regarding the clicking sound etc.... If it is only happening with the pedal...

Yea I actually reached out to Bruce and he confirmed that you do not need a balanced tube for the PI position. That was after i ordered a balanced Sovtek 12ax7-LPS :doh: . I think i just have not been happy with the JJ ECC83S Standards. I think they compressed channel 2 too much and are a...

Thanks for the reply Eracer and link! I think im going to go ahead and try the stock Sovteks that were in there and i also ordered a Sovtek 12AX7-LPS for the PI slot. This would be a good start i think.

So i am looking to swap out my preamp tubes. I have some laying around and was wondering the best configuration. Right now my Channel 2 seems very gainy and compressed. Wanting to tame it a bit to get back the note definition. I currently have all JJ ECC83S Standards in there. I have the...

Was just curious as i have gone back and forth with this. Curious what you folks are doing. For Channel 2, Do you crank the preamp volume or leave the preamp around noon and crank the power amp volume? I have usually had the preamp volume at about 3 oclock or higher with the gain around...

So i'm thinking about selling my Tweaker 40 head and picking up the Rebel 30 MKII combo and running it with the Rebel 112x extension cab i currently also own. Currently my main rig is a Renegade 65 with the matching 212 cab. Wondering if i will be losing alot of character and low end running...

St. Louis!

I believe that i had to flip the switch when i used the CC delay. Its been a while but i would give it a try, it should fix your issue.