Search results

Can't remember but I'm pretty sure they were the same settings as far as the switch positions, the eq might have been tweaked a little but nothing major. I did have the SAT switch on and frequency switch to the left for the Alice in Chains riffs

Thanks dude! These are the settings I used in that video: Standard BE channel with the gain on 10, treble and mids at 5, bass almost on 10, presence at 4, thump pretty low at 2 and a half. Frequency and response switches to the right, voice in the middle, highest gain structure. All the other...

Thanks dude, yes George Lynch is one of my main influences, this track is definitely a nod towards the first Lynch Mob record :)

Thanks guys! 🙏

Thanks man, it's really nothing special as you can see from the screenshots. Just a small boost in the high end and an EQ after that to tame some offensive frequencies. I could have engaged the Master EQ button in the plugin and call it a day to be honest, I'm just used to carve out those...

Thanks dude!

Hey guys! Just uploaded a new video testing the new Goldstack cab pack from GGD, these are undoubtedly some of the best Greenback IRs I've come across! I think I'm in love with the room mics, never really cared for those in other packs but here they sound absolutely phenomenal, there's also a...

LOVE that record, my second favorite Crue album after Dr. Feelgood. Such a departure from the polished sound they had on Feelgood, much more raw and heavy, Corabi's singing on it is just killer. Mick's tone was a blend of his trusty Jose modded Marshall and an SLO, Bob Rock talks about it here...

Had problems in the past accessing the site too, but I was able to contact Jorg via email at info@bogneramplification.com Hope this helps :2thumbsup:

Thanks dude! Here's the setting I used, it's actually Misha's Defined Thickness stock preset with the master EQ engaged

Here's a quick mixtest using my "new" Peavey 5150 Block Letter (1992) into the Getgood Drums Cali IR plugin, absolutely love these cabs :rock::rock: Full signal chain: Chapman ML1 Bea (Seymour Duncan Custom) -> Maxon OD808 -> Peavey 5150 -> Suhr Reactive Load -> GGD Cali Bass: Submission Audio...

Thank you guys!

To echo @LP Freak 's post, I always find it a bit funny when people on forums talk about Friedmans "not cutting through the mix", while guys like Steve Stevens, Jerry Cantrell and many other pros don't seem to have any problem with that :dunno: ...I also played with my bandmate's older gen BE100...

Thanks guys! It's a slightly modded pro-mod Charvel San Dimas, pickups are stock though (Seymour Duncan JB/59)

A couple of people on the Friedman Facebook group were asking whether or not you need an attenuator to be able to enjoy the BE100DLX at low volumes, so I've recorded this quick clip with the system volume at 0.5. I don't know how Dave does this, but the master/system volume on this amp is...

Thanks dude!

Try this: BE channel, Frequency and Response switches to the left, Voice switch center. All the switches in the back off (down position) except for the SAT switch which should be on (up position). If you'd like it to sound a bit more open/less squishy flip the response switch to the right...

Thanks Devin!

Thank you! This might help setting it up!

Thanks man! I'm basically going out from the Suhr Reactive load into the input of the audio interface (UA Arrow). The Arrow is connected via Thunderbolt to the Mac and I'm recording the raw track (without cab sim) in Cubase. This way I can experiment with different cabs/mic settings using the...