If you go WIMA, you’re going to have a hard time finding axial lead capsWhat would you guys choose for an 800 build Mallory, Synergy, Wima?
My buddy Daniel at Deadweald Audio and H&K recommended Wima for this build.
What do you guys like and why?
Yeah it's a pcb.Are you using a pcb? If so what’s the lead spacing? I like them all but I’d opt for the wima’s on a pcb. For a PTP I prefer the synergy’s over Mallory or a mix. Only downsides to synergy’s are how giant they are and the price.
Thanks man do you have the series info for the WIMA's? I know Friedman prefers synergy. I got a pcb from AA Electronics and Nik at Ceriatone is hooking me up with chassis and a few other pieces. Now I just need faceplates, Iron, and caps. I think this is my 5 or 6 JCM build so I'm going to take my time and keep this one. The only mods I think I'm going to do is maybe Jason's Fet boost.On my latest Marshall MOAB mods, I’ve been using Wimas exclusively and they are great. They are direct fit into ST1 boards. Wimas are also very good as cathode bypass caps.
My Hellion uses Synergy coupling caps. Also excellent, but very expensive. I do use Wimas as bypass caps in a couple spots. As stated above, if you’re using a turret board, Wimas aren’t an option.
Here’s the series I use. This cap is direct fit for ST1’s @ 10mm lead spacing.Thanks man do you have the series info for the WIMA's? I know Friedman prefers synergy. I got a pcb from AA Electronics and Nik at Ceriatone is hooking me up with chassis and a few other pieces. Now I just need faceplates, Iron, and caps. I think this is my 5 or 6 JCM build so I'm going to take my time and keep this one. The only mods I think I'm going to do is maybe Jason's Fet boost.
This is perfect! Thanks!Here’s the series I use. This cap is direct fit for ST1’s @ 10mm lead spacing.
https://www.mouser.com/ProductDetail/WIMA/MKP4J022203C00JSSD?qs=sJjjjplDs9teU8nNaiSfPg==