That1Guy
Active member
SOLD
Here we have a well played and worn Orville Custom with a fat neck. The frets are close to needing replacement but, as is, it rings clear without fretting out at any point across the fretboard and with low action (around 2/32). Neck & Fret measurements can be found below. I upgraded the wiring with a Dark Moon harness swapping the neck volume pot with a Gibson Push/Push to split coils in the neck position. Neck= 57' Classic, Bridge= 498t. Weighs just over 9lb. Comes with a Gibson Case, toggle poker chip, and Pick Guard. Again, plenty of wear, nicks, chips, and at some point it's clearly had stickers on it. I tried to take good pictures of "tan line" areas. I've included a bunch of pics and have more that I'll share if asked or in future bumps. Thanks for looking!
Neck:
Width @ Nut: 1.71, Depth @ 1st Fret: .872
Width @ 12th Fret: 2.07, Depth: .973
Fret Height: .032-.034 across the neck
Here we have a well played and worn Orville Custom with a fat neck. The frets are close to needing replacement but, as is, it rings clear without fretting out at any point across the fretboard and with low action (around 2/32). Neck & Fret measurements can be found below. I upgraded the wiring with a Dark Moon harness swapping the neck volume pot with a Gibson Push/Push to split coils in the neck position. Neck= 57' Classic, Bridge= 498t. Weighs just over 9lb. Comes with a Gibson Case, toggle poker chip, and Pick Guard. Again, plenty of wear, nicks, chips, and at some point it's clearly had stickers on it. I tried to take good pictures of "tan line" areas. I've included a bunch of pics and have more that I'll share if asked or in future bumps. Thanks for looking!
Neck:
Width @ Nut: 1.71, Depth @ 1st Fret: .872
Width @ 12th Fret: 2.07, Depth: .973
Fret Height: .032-.034 across the neck
Attachments
Last edited: