Tube layout for the Egnater designed Randall RT2-50

[Scott Peterson]

I would like to know the tube layout for the RT2/50 so I don't have to pull it out of the rack and take the top off just to see. I know what power tubes are channel a/b; I would like to know which is which amongst the three preamp tubes. I assume the two outside ones are the phase inverters and the middle one is for the EQ/gainstaging?

 

[bruce egnater]

The middle one is split with 1/2 for each (L & R) input stage so it is common to both channels. The rest is correct Scott.