CCV Settings

  • Thread starter Thread starter steve_k
  • Start date Start date
steve_k

steve_k

New member
High Output thru 4x12 Bogner with Scumback M/H75's 16 ohm/25 watt.

Clock settings.....

Voice - Left
Dark - Center
Punch - 2
Presence - 2

Channel 1 [Clip - right, Bright - right]
M - 11
B - 2
M - 8
T - 5
G - 2

Channel 2 [Solo Clip - right, Master Clip - right, Gain1 - Right, Gain 2 - Middle, Drive - Left|
S - 12
M - 10
B - 1
M - 10
T - 2
G1 - 1
G2 - 2
 
I'm running about the same except lower masters. Gain brights to the left or centered. A tad higher clean treble...definitely sounds better/cleaner with the bass mostly down.
The amp sounds best to me with the voice to the left and dark centered.
I'm getting a pretty good hum (not hiss) in the gain channels. Anyone else hearing a hum as the volume goes up on Ch2/Solo?
It is very noticeable in the max clipping mode.
Other than the hum this amp is killer...hoping someone knows what might be causing it?
 
I can't hear the hum. Oh, but wait! My amp hasn't shipped yet....... :hys:

Actually....... :cry:
 
No hum on my original #3 either. Daves right you do get HG hiss but I have never had any hum issues.
 
this is a hum not hiss..gets louder as the mv goes up.
Steve K gave me some info that I'll try.

EDIT: Found out it was a grounding issue in my guitar...not the amp.
 
rokker":1dev35pt said:
this is a hum not hiss..gets louder as the mv goes up.
Steve K gave me some info that I'll try.

EDIT: Found out it was a grounding issue in my guitar...not the amp.

Good to know brother. Glad you found the problem and it wasn't in the amp.


Steve
 
rlord1974":qo29y3qy said:
I can't hear the hum. Oh, but wait! My amp hasn't shipped yet....... :hys:

Actually....... :cry:

Did they ship your and the other two guys amps yet? I thought they were suppose to go out this week!
 
:D

4930841043_1c691dbbb8.jpg
 
bwgintegra":1rhtaxht said:
rlord1974":1rhtaxht said:
I can't hear the hum. Oh, but wait! My amp hasn't shipped yet....... :hys:

Actually....... :cry:

Did they ship your and the other two guys amps yet? I thought they were suppose to go out this week!

Nope. But they should ship within the next day or two! :thumbsup:
 
rlord1974":33fuokqo said:
bwgintegra":33fuokqo said:
rlord1974":33fuokqo said:
I can't hear the hum. Oh, but wait! My amp hasn't shipped yet....... :hys:

Actually....... :cry:

Did they ship your and the other two guys amps yet? I thought they were suppose to go out this week!

Nope. But they should ship within the next day or two! :thumbsup:

UPDATE: FedEx tracking number received! :thumbsup:

 
Congrats....we'll be on the lookout for the big sell-off of non-Cameron gear!
 
steve_k":1g7uf8fv said:
Congrats....we'll be on the lookout for the big sell-off of non-Cameron gear!

Haven't you noticed?.....It's already in progress! I've been "downsizing" for months now! :lol: :LOL:
 
rokker":3gzvisgw said:
Awesome news Rob...when it the eta for Toronto

Not quite sure - the FedEx site isn't providing an estimated arrival date yet. I'd guess around October 26, given Canada Customs' inability to process a package in less than 3 days..... :thumbsdown:
 
rlord1974":3ca7hxvd said:
rokker":3ca7hxvd said:
Awesome news Rob...when it the eta for Toronto

Not quite sure - the FedEx site isn't providing an estimated arrival date yet. I'd guess around October 26, given Canada Customs' inability to process a package in less than 3 days..... :thumbsdown:

You need a PO Box on the US side of the border. Drive back to Toronto. Unless your last name is Patel, Canadian Customs are going to fuck you like a house cat.

Steve
 
steve_k":333xagxz said:
rlord1974":333xagxz said:
rokker":333xagxz said:
Awesome news Rob...when it the eta for Toronto

Not quite sure - the FedEx site isn't providing an estimated arrival date yet. I'd guess around October 26, given Canada Customs' inability to process a package in less than 3 days..... :thumbsdown:

You need a PO Box on the US side of the border. Drive back to Toronto. Unless your last name is Patel, Canadian Customs are going to fuck you like a house cat.

Steve

You got that right. I have $455 in import taxes and $80 in FedEx brokerage charges coming at me via that CCV......That probably makes my CCV the most expensive CCV to-date. :doh: If I don't like it, I'd happily sell it to you for $3,800 + shipping, Steve....... :hys:
 
rlord1974":3usdg4n4 said:
steve_k":3usdg4n4 said:
rlord1974":3usdg4n4 said:
rokker":3usdg4n4 said:
Awesome news Rob...when it the eta for Toronto

Not quite sure - the FedEx site isn't providing an estimated arrival date yet. I'd guess around October 26, given Canada Customs' inability to process a package in less than 3 days..... :thumbsdown:

You need a PO Box on the US side of the border. Drive back to Toronto. Unless your last name is Patel, Canadian Customs are going to fuck you like a house cat.

Steve

You got that right. I have $455 in import taxes and $80 in FedEx brokerage charges coming at me via that CCV......That probably makes my CCV the most expensive CCV to-date. :doh: If I don't like it, I'd happily sell it to you for $3,800 + shipping, Steve....... :hys:

Nah, the Federal Republic of Canadistan export models are too pricy for me.....
 
:lol: :LOL: :lol: :LOL: :lol: :LOL:
steve_k":2d46wzxh said:
rlord1974":2d46wzxh said:
steve_k":2d46wzxh said:
rlord1974":2d46wzxh said:
rokker":2d46wzxh said:
Awesome news Rob...when it the eta for Toronto

Not quite sure - the FedEx site isn't providing an estimated arrival date yet. I'd guess around October 26, given Canada Customs' inability to process a package in less than 3 days..... :thumbsdown:

You need a PO Box on the US side of the border. Drive back to Toronto. Unless your last name is Patel, Canadian Customs are going to fuck you like a house cat.

Steve

You got that right. I have $455 in import taxes and $80 in FedEx brokerage charges coming at me via that CCV......That probably makes my CCV the most expensive CCV to-date. :doh: If I don't like it, I'd happily sell it to you for $3,800 + shipping, Steve....... :hys:

Nah, the Federal Republic of Canadistan export models are too pricy for me.....
:lol: :LOL: :lol: :LOL:
 
Back
Top