EVH 5150 III El34 C137 MOD

@RaceU4her have you tried putting some 5751 tubes in the positions dedicated to the red channel? This will bring down the gain range a bit, without neutering the tone and while the insanity is still there, it kicks in maybe after 13 or 14 'o clock on the gain knob of red and gives you some more classic rock/hard rock tone to work with at lower settings.
I don't know the 100W tube lay out, but in my 50W 6L6 it's V3 and V4.
 
Speeddemon said:
@RaceU4her have you tried putting some 5751 tubes in the positions dedicated to the red channel? This will bring down the gain range a bit, without neutering the tone and while the insanity is still there, it kicks in maybe after 13 or 14 'o clock on the gain knob of red and gives you some more classic rock/hard rock tone to work with at lower settings.
I don't know the 100W tube lay out, but in my 50W 6L6 it's V3 and V4.
Click to expand...


I’ve not, but I was wondering if there was a tube that tamed the gain a little so maybe ill give that a try
 
Speeddemon said:
@RaceU4her have you tried putting some 5751 tubes in the positions dedicated to the red channel? This will bring down the gain range a bit, without neutering the tone and while the insanity is still there, it kicks in maybe after 13 or 14 'o clock on the gain knob of red and gives you some more classic rock/hard rock tone to work with at lower settings.
I don't know the 100W tube lay out, but in my 50W 6L6 it's V3 and V4.
Click to expand...
Do you replace both V3 and V4 with the 5751? I got to try this.
 
MetalHeart said:
Do you replace both V3 and V4 with the 5751? I got to try this.
Click to expand...
Yes, I replaced two of them. This helped s lot. Imagine the old gain range going from 0 to 10 (where 0 as already had too much gain for classic rock and past 4 or 5 you were in the over saturation zone)...with those tubes you sort of shifted it to -2 to 8, so to speak.
 
Speeddemon said:
Yes, I replaced two of them. This helped s lot. Imagine the old gain range going from 0 to 10 (where 0 as already had too much gain for classic rock and past 4 or 5 you were in the over saturation zone)...with those tubes you sort of shifted it to -2 to 8, so to speak.
Click to expand...
Definitely going to order me some and try it.
Description under those tubes on tube depot is spot on with what you're saying 👌
 
Speeddemon said:
@RaceU4her have you tried putting some 5751 tubes in the positions dedicated to the red channel? This will bring down the gain range a bit, without neutering the tone and while the insanity is still there, it kicks in maybe after 13 or 14 'o clock on the gain knob of red and gives you some more classic rock/hard rock tone to work with at lower settings.
I don't know the 100W tube lay out, but in my 50W 6L6 it's V3 and V4.
Click to expand...
THIS! A 5751 in V1 spot made me Engl SE usable. I’m sure it would work for this amp as well.
 
You must log in or register to reply here.
Back
Top