Bash_Man
Well-known member
Hey everyone,
So I noticed recently my FX8 started to cause what appears to be a ground loop from the output of the FX8 to the Input of the amp.
Couple of troubleshooting steps I did:
I am using Hum buster cables, however I built those myself based on wiring diagram here:.
https://wiki.fractalaudio.com/wiki/index.php?title=Humbuster
Going to check all my cables again and make sure all the solder points are good.
If everything passes and still have the noise, anything else I can check?
Any help would be appreciated.
Thanks
Thanks
So I noticed recently my FX8 started to cause what appears to be a ground loop from the output of the FX8 to the Input of the amp.
Couple of troubleshooting steps I did:
- Noise is there even if I bypass the FX8.
- Noise goes away if I plug directly into the amp even if the fractal is still in the amp's loop (inline or bypassed).
- Bypassing loop or removing loop cables, the noise remains.
https://wiki.fractalaudio.com/wiki/index.php?title=Humbuster
Going to check all my cables again and make sure all the solder points are good.
If everything passes and still have the noise, anything else I can check?
Any help would be appreciated.
Thanks
Thanks