Help!

OK so @Jack Luminous appears to be closest so far. Pretty hard to run two loops with the same pedals without a Loop Switcher, like Radial would have. Loopbone I think for example.

Steve are you wanting to use the dual Stereo Ins and Outs of your two pedals?
 
JackBootedThug said:
Effects loop question. How do I run the chorus and delay into each amps effects loops? Everything else is up front going into the aby. Aby outs into hum eliminator then to each amps inputs. View attachment 372761
Click to expand...

Like a stereo chorus rig slaving one amp?

Effects send goes into the chorus pedal in, effects return of that same amp is chorus out L. Effects return of the other amp is chorus R. Stereo delay pedal L and R go between the L and R of the amps and the chorus.

If you’re not slaving one amp and want those in stereo too then you need to mix them and send the mix to effects post recording. If you want to do it live then you need a lot more gear than what’s on the floor and someone else to explain how best to do it.
 
311splawndude said:
OK so @Jack Luminous appears to be closest so far. Pretty hard to run two loops with the same pedals without a Loop Switcher, like Radial would have. Loopbone I think for example.

Steve are you wanting to use the dual Stereo Ins and Outs of your two pedals?
Click to expand...
Yes sir…. I’m going to continue messing around with it. I’m adhd as fuck sometimes so I have to just walk away…. Then I see something sparkling and forget what I was doing. However I’m having some kind of issue with the fx65 chorus. Extremely weak sounding. Going to check out the power supply when I get home. I actually think it’s not drawing enough power. If you look it has an adapter that connects to the 9 volt battery terminal. I’m running my power supply into that. Might be the issue.
 
JackBootedThug said:
Yes sir…. I’m going to continue messing around with it. I’m adhd as fuck sometimes so I have to just walk away…. Then I see something sparkling and forget what I was doing. However I’m having some kind of issue with the fx65 chorus. Extremely weak sounding. Going to check out the power supply when I get home. I actually think it’s not drawing enough power. If you look it has an adapter that connects to the 9 volt battery terminal. I’m running my power supply into that. Might be the issue.
Click to expand...

Wait, so you want me to look at that picture again :lol:















j/k

I can't actually see that it connects to the 9volt battery terminal. You mean adapter? I have one of those for my OG Big Muff. I seriously doubt that could cause a weakening of sound but maybe. You could try plugging in a known good 9volt battery? But as far as I know you can't run two stereo pedals like that together but now I wanna try with my Reverb and Chorus :lol:


RxorMQZ.jpg
 
Last edited:
You guys are making me feel bad. It’s a mock up before I put stuff on my gator board….. or maybe not…..hmmmm….
 
311splawndude said:
Any closer to resolve JBT?


o3WvcGj.jpg
Click to expand...
Ohhh yes. Just one amp though. Going to switch everything to the pv instead of the Egnater. I’m going to ship the chorus to the man himself for repair. Definitely has a low power issue. Picked up some new batteries to try out. Got a house full right now so I can’t do shit at the moment.
 
311splawndude said:
Wait, so you want me to look at that picture again :lol:















j/k

I can't actually see that it connects to the 9volt battery terminal. You mean adapter? I have one of those for my OG Big Muff. I seriously doubt that could cause a weakening of sound but maybe. You could try plugging in a known good 9volt battery? But as far as I know you can't run two stereo pedals like that together but now I wanna try with my Reverb and Chorus :lol:


RxorMQZ.jpg
Click to expand...
Just tried it with a fresh new 9 volt. Same shit. Barely hear the chorus effect. Got it boxed up and shipping it to the man himself. Hopefully he will hump it into shape….and film it while doing it…hopefully…
 
You must log in or register to reply here.
Back
Top