Marshall JMP experts I need your help!

  • Thread starter Thread starter jharpersj
  • Start date Start date
Thank you everyone! I greatly appreciated and will report back! just to give you an idea how times have changed I bought a bone stock JMP form Cap232 for I think $700 ish, that was a long time ago but damn I miss those days!
 
burger said:
It’s a 2204 conversion, 10k cold clipper. Looks to be modded to a stock 2204. There is A LOT that can be done with these if you are inclined to have it modded. The guys here are correct, it’s had a lot of components already replaced. I’d want to see the transformers before considering a buy.
Click to expand...
thank you so much for the info!
 
Greazygeo said:
They are physically ALOT larger than the stock ones and higher voltage rating. Not going to hurt anything as long as they are installed in the pc board ok.
Click to expand...
BTW loved the tone you used to get out of a VHT!
 
All this talk of Mustards reminds me of this local rib joint of that name. The thing was the ribs were only so so but the burgers were amazing and their dessert were these flash fried donut holes covered in glaze. So good!
 
You must log in or register to reply here.
Back
Top