rackmount harmonizer ??

  • Thread starter Thread starter MYLILSS
  • Start date Start date
M

MYLILSS

Well-known member
dumb question I am sure, but I use an eventide pitchfactor in my live rig and it says on at all times. the knobs are very touchy so I am always having to double check the settings. I am a set it and forget it type of guy, so I was curious if they make something similar but in a rackmount version. I know abut the H3000 and all of that stuff, but was curious about more affordable alternatives if there are any
 
MYLILSS":ukk0bz2m said:
dumb question I am sure, but I use an eventide pitchfactor in my live rig and it says on at all times. the knobs are very touchy so I am always having to double check the settings. I am a set it and forget it type of guy, so I was curious if they make something similar but in a rackmount version. I know abut the H3000 and all of that stuff, but was curious about more affordable alternatives if there are any
Click to expand...

You could rack mount an Eventide H9 pedal, on a pedal tray. I LOVE my H8000FW, but it is NOT an "Affordable" alternative for a Pitch Factor.
 
Define affordable.... I've seen Eventide Eclipses going to reasonable prices, the Eventide H9 isn't difficult to find, either. The Digitech is good (good enough for David Gilmour), but not quite the same sound as an Eventide.

You mentioned you're already using a PitchFactor. What is it not doing for you? Have you tried using it in a pedal drawer so the knobs don't easily get knocked around? I'm assuming that you're using presets to store the base sounds, then modifying to taste based on the situation. Maybe save those changes to a preset, too, that you could restore whenever necessary?
 
ChurchHill":2nlxhvpk said:
Define affordable.... I've seen Eventide Eclipses going to reasonable prices, the Eventide H9 isn't difficult to find, either. The Digitech is good (good enough for David Gilmour), but not quite the same sound as an Eventide.

You mentioned you're already using a PitchFactor. What is it not doing for you? Have you tried using it in a pedal drawer so the knobs don't easily get knocked around? I'm assuming that you're using presets to store the base sounds, then modifying to taste based on the situation. Maybe save those changes to a preset, too, that you could restore whenever necessary?
Click to expand...

affordable would be not 5K lol. personally I love the eventide sound so I am probably going to stick with eventide even if it means spending extra cash. the pitchfactor is perfection and does exactly what I need it to, I just hate how the knobs are so touch sensitive. I may look into the eclipse or an H9.
 
Yeah, I'd have to agree with Zackman about rackmounting either the PitchFactor or an H9. At least the knobs wouldn't be as easy to accidentally bump.

I wish I had an H8000, or the new H9000, but I do have an H3000DSE, a GTR4000 with the DSP presets card, and the Eclipse. I've seen used examples of all 3 go for $1000-1500 lately, certainly well below the $5K limit. I think the Eclipse comes with the TimeFactor and ModFactor algorithms, but I don't miss not having the PitchFactor or Space algos. The Eclipse simply has better sounding options (and I've got a PitchFactor and a Space if need be). If you're thinking about going that way, I don't think I could recommend it enough.
 
The knobs can be locked...

From the manual >>>>
Press the Encoder to select. Turn the Encoder to select CATCHUP or lock the knobs.
In NORMAL mode, the Parameter Control Knobs are always active. With CATCHUP selected,
the Parameter Control Knobs must be turned to the position which corresponds to their
current parameter value before they become active. See p.38 for more info on CATCHUP.
The knobs can also be LOCKED, to prevent inadvertent changes to your sound.
Press the Middle Footswitch once to back-up one level to UTILITY menu.
Press the Middle Footswitch twice to go to top level System menu.

I have the latest FW and this is the correct procedure. Hope this helps!!
 
I was wondering about that. I thought I'd seen something along those lines, but couldn't recall.
 
phil b":1zb4n5tc said:
The knobs can be locked...

From the manual >>>>
Press the Encoder to select. Turn the Encoder to select CATCHUP or lock the knobs.
In NORMAL mode, the Parameter Control Knobs are always active. With CATCHUP selected,
the Parameter Control Knobs must be turned to the position which corresponds to their
current parameter value before they become active. See p.38 for more info on CATCHUP.
The knobs can also be LOCKED, to prevent inadvertent changes to your sound.
Press the Middle Footswitch once to back-up one level to UTILITY menu.
Press the Middle Footswitch twice to go to top level System menu.

I have the latest FW and this is the correct procedure. Hope this helps!!
Click to expand...

Oh shit ! I didn’t know that. That makes this easier for sure. The pedal is rackmounted in my rig but slight bumps and stuff always tweak the knobs just a bit. Being able to lock the knobs is really all I need to be able to do. I got the pedal used so didn’t get a manual or anything with it
 
MYLILSS":391eenve said:
phil b":391eenve said:
The knobs can be locked...

From the manual >>>>
Press the Encoder to select. Turn the Encoder to select CATCHUP or lock the knobs.
In NORMAL mode, the Parameter Control Knobs are always active. With CATCHUP selected,
the Parameter Control Knobs must be turned to the position which corresponds to their
current parameter value before they become active. See p.38 for more info on CATCHUP.
The knobs can also be LOCKED, to prevent inadvertent changes to your sound.
Press the Middle Footswitch once to back-up one level to UTILITY menu.
Press the Middle Footswitch twice to go to top level System menu.

I have the latest FW and this is the correct procedure. Hope this helps!!
Click to expand...

Oh shit ! I didn’t know that. That makes this easier for sure. The pedal is rackmounted in my rig but slight bumps and stuff always tweak the knobs just a bit. Being able to lock the knobs is really all I need to be able to do. I got the pedal used so didn’t get a manual or anything with it
Click to expand...

You can d-load right from Eventides site. Its definitely worth checking out as it goes into the parameters to setup the pedal depending on how your wired. I have mine mounted in my rack also but I dont have the problem with the knobs getting tweaked. Go get that manual!! Glad its gonna work it. :thumbsup:
 
ChurchHill":1ximo9h5 said:
Yeah, I'd have to agree with Zackman about rackmounting either the PitchFactor or an H9. At least the knobs wouldn't be as easy to accidentally bump.

I wish I had an H8000, or the new H9000, but I do have an H3000DSE, a GTR4000 with the DSP presets card, and the Eclipse. I've seen used examples of all 3 go for $1000-1500 lately, certainly well below the $5K limit. I think the Eclipse comes with the TimeFactor and ModFactor algorithms, but I don't miss not having the PitchFactor or Space algos. The Eclipse simply has better sounding options (and I've got a PitchFactor and a Space if need be). If you're thinking about going that way, I don't think I could recommend it enough.
Click to expand...

When I saw your setup, I thought 'That's pretty much my setup. I am not alone'... LOL :thumbsup: :rock:
 
Zackman, thank you! I've learned so much from reading your posts here and at HRI. I could've never put it together without all your and several others posts. Next time I'm in your neck of the woods, I'll have to stop by your store and say hello.

:rock: :rock: :rock:
 
G-Force, it tracks perfectly but Digitech is more affordable.
 
MYLILSS":ffckriyz said:
Oh shit ! I didn’t know that. That makes this easier for sure. The pedal is rackmounted in my rig but slight bumps and stuff always tweak the knobs just a bit. Being able to lock the knobs is really all I need to be able to do. I got the pedal used so didn’t get a manual or anything with it
Click to expand...

You have your solution for this pedal. I'd just note that the general old school solution is to run some heavy-duty tape around the knobs on the pedal to keep them form accidentally turning. You can also add some chicken scratches on the pedal on where to align the knobs for quick reference.
 
rstites":tvb3mr9q said:
MYLILSS":tvb3mr9q said:
Oh shit ! I didn’t know that. That makes this easier for sure. The pedal is rackmounted in my rig but slight bumps and stuff always tweak the knobs just a bit. Being able to lock the knobs is really all I need to be able to do. I got the pedal used so didn’t get a manual or anything with it
Click to expand...

You have your solution for this pedal. I'd just note that the general old school solution is to run some heavy-duty tape around the knobs on the pedal to keep them form accidentally turning. You can also add some chicken scratches on the pedal on where to align the knobs for quick reference.
Click to expand...

Yep, I remember the days of black marker lines for the settings and then a nice big piece of Duct tape across the face of the pedal over top all the knobs.. man, those were the days!! :lol: :LOL:
 
You must log in or register to reply here.
Back
Top