Renegade 65W head reverb

  • Thread starter Thread starter bamfx7
  • Start date Start date
bruce responded, multiple times no less, in another thread with the exact same content. you should probably read through that one before bumping this thread with only a "?" as the bumping post.
 
I've been back and forth with someone named Nate regarding the crap reverb as well as a harmonic type noise vibration going on with my 112 Renegade. He finally said it sonded like a bad reverb board. He said they were out of stock for 60 days. When I checked in after about 45 days, he got all pissy with me, saying "I told you 60 days." Then, after NINETY days, I emailed him again and they STILL didn't have them in stock!!! He said two more weeks! The two more weeks is over now, so we'll see what happens on Monday. They want $90 + 10 for shipping. I'm not happy. I expected much more and much better service from Bruce & Co. And with all that, they STILL have no answer to the annoying, incessant buzz I get at certain frequencies. All they say is to take it to one of their official repair places..... The closest of which is IN ANOTHER STATE!!!!
 
Hello hbucker, your playing with too much channel volume, turn the master up and the channel down. the only other thing to try if your channel volumes are about noon and your still getting the bad spring reverb sound is there is a FX loop 20db pad switch inside the Renegade get at it and try giving that a poke, I could be talking crap but if your loop is on and its in the high position that might be pushing a too hot signal into the reverb, or as I said I could be talking shit. other than that stop using it, reverbs for beginers anyhow.....but the reverb is not the best.

01-1.jpg


02-1.jpg


P.S. be careful with the insides of your valve amp children, touching the wrong thing will give you a bad hair day......
 
Back
Top