J
jmpman
Active member
For sale is my Suhr SL68 100 Watt Amp Head. Purchased new from WildWood Guitars in 2021. In like-new excellent condition, completely stock along with the factory installed tubes. Will be shipped in original shipping box with power cord. SOLD
More information-
POWER SELECT SWITCH
Offers the following three-positions:
OFF: Amplifier's power mains are switched off
HI: On, normal operation
LOW: Changes the SL-68's feel from tight and aggressive to spongy with a smoother attack, excellent for solo playing.
PRESENCE - The Presence control adjusts the amount of high frequencies added to your sound, turning it clockwise will add more cut and sparkle to your tone.
BASS - The Bass control adjusts the low end, turning it clockwise increases the amount of low frequencies in your tone.
MIDDLE - The Middle control adjusts the midrange, turning it clockwise increases the mids, making it fatter. Turning it counterclockwise will reduce the mids and produce a scooped type of sound.
TREBLE - The Treble control adjusts the top end. Turning it clockwise increases the amount of brightness or treble frequencies in your tone.
VOLUME I - Adjusts the overall output level of Channel I.
VOLUME II - Adjusts the overall output level of Channel II.
CHANNEL I INPUT (top) - Has a high sensitivity and voiced brighter than Channel II.
CHANNEL I INPUT (bottom) - Has low sensitivity and offers a slightly warmer tone.
CHANNEL II INPUT (top) - Has high sensitivity and offers a normal/bassier tonal response.
CHANNEL II INPUT (bottom) - Has low sensitivity and a normal/bassier tonal response.
BRIDGING OR JUMPING THE CHANNELS - Bridging or Jumping the channels will unlock a palette of sounds and expand the SL-68's possibilities. Begin by plugging your guitar into the top (high sensitivity) input of Channel I, then run a short instrument patch cable from Channel I's bottom (low sensitivity) input to the top (high sensitivity) input of Channel II, then blend Volume I and Volume II controls to dial in a wealth of new and unique tones.
MASTER VOLUME - Adjusts the SL-68's overall output level and offers the flexibility to dial up rich, high-gain overdrive at any volume.
SPEAKER OUTPUTS - Two loudspeaker outputs wired in parallel with 3-way impedance selector switch for 4Ω, 8Ω & 16Ω.
SPECIFICATIONS:
Output: 100 Watts RMS
Tubes: 4-EL34 & 3-12AX7
Front Panel: Power Select Switch, Presence, Bass, Middle, Treble, Volume I, Volume II controls and four inputs
Back Panel: Master Volume, 2-Speaker outputs, Impedance selector (4Ω, 8Ω, & 16Ω), HT Fuse, Mains Inlet and Mains Fuse
More information-
POWER SELECT SWITCH
Offers the following three-positions:
OFF: Amplifier's power mains are switched off
HI: On, normal operation
LOW: Changes the SL-68's feel from tight and aggressive to spongy with a smoother attack, excellent for solo playing.
PRESENCE - The Presence control adjusts the amount of high frequencies added to your sound, turning it clockwise will add more cut and sparkle to your tone.
BASS - The Bass control adjusts the low end, turning it clockwise increases the amount of low frequencies in your tone.
MIDDLE - The Middle control adjusts the midrange, turning it clockwise increases the mids, making it fatter. Turning it counterclockwise will reduce the mids and produce a scooped type of sound.
TREBLE - The Treble control adjusts the top end. Turning it clockwise increases the amount of brightness or treble frequencies in your tone.
VOLUME I - Adjusts the overall output level of Channel I.
VOLUME II - Adjusts the overall output level of Channel II.
CHANNEL I INPUT (top) - Has a high sensitivity and voiced brighter than Channel II.
CHANNEL I INPUT (bottom) - Has low sensitivity and offers a slightly warmer tone.
CHANNEL II INPUT (top) - Has high sensitivity and offers a normal/bassier tonal response.
CHANNEL II INPUT (bottom) - Has low sensitivity and a normal/bassier tonal response.
BRIDGING OR JUMPING THE CHANNELS - Bridging or Jumping the channels will unlock a palette of sounds and expand the SL-68's possibilities. Begin by plugging your guitar into the top (high sensitivity) input of Channel I, then run a short instrument patch cable from Channel I's bottom (low sensitivity) input to the top (high sensitivity) input of Channel II, then blend Volume I and Volume II controls to dial in a wealth of new and unique tones.
MASTER VOLUME - Adjusts the SL-68's overall output level and offers the flexibility to dial up rich, high-gain overdrive at any volume.
SPEAKER OUTPUTS - Two loudspeaker outputs wired in parallel with 3-way impedance selector switch for 4Ω, 8Ω & 16Ω.
SPECIFICATIONS:
Output: 100 Watts RMS
Tubes: 4-EL34 & 3-12AX7
Front Panel: Power Select Switch, Presence, Bass, Middle, Treble, Volume I, Volume II controls and four inputs
Back Panel: Master Volume, 2-Speaker outputs, Impedance selector (4Ω, 8Ω, & 16Ω), HT Fuse, Mains Inlet and Mains Fuse
Attachments
Last edited:
