Trailer Trash Pedalboards User Gallery

[AdamSG]

Here's my new board. It's actually a revamped version of a previous TT board I've had a couple of years. Had some pedals changed and some wiring changes.

Here is the signal flow:

Teese RMC8 Wah- First thing in the chain, not in any loops
Tuner- In a loop by itself, seperate from everything

The large, 5 loop Loop-Master has these effects running out front:

Loop 1- Analogman mini comprossor>
Loop 2- Fulldrive 2 Mosfet>Zendrive>
Loop 3- Klon Centaur>T-Rex Replica Delay (labeled as drive delay)
Loop 4- Catalinbread Semaphore Trem>
Loop 5- Fulltone Fat-Boost 2>

Micro 1 Loop Loop-Master- DLS Effects RotoSim>Red Witch Phaser>T-Rex Replica Delay (labeled as color delay)>

EP-Booster

The effects in the micro looper and the EP-booster are ran in the effects loop.

Underneath the board, there are two Voodoo Labs Pedal Powers powering everything, and at the very end of the signal flow is an Axcess Electronics line buffer to ensure that there is no signal loss.

Best part is, i can use a short patch cable to plug into the amp and send-in plugs, and completely bypass the effects loop wiring, enabling everything on the board to be ran in front of the amp!

Read more: http://ztalk.proboards.com/index.cgi?ac ... z1RP1PeRgS

 

[Oldschool]

Here's my new board. It's actually a revamped version of a previous TT board I've had a couple of years. Had some pedals changed and some wiring changes.

Here is the signal flow:

Teese RMC8 Wah- First thing in the chain, not in any loops
Tuner- In a loop by itself, seperate from everything

The large, 5 loop Loop-Master has these effects running out front:

Loop 1- Analogman mini comprossor>
Loop 2- Fulldrive 2 Mosfet>Zendrive>
Loop 3- Klon Centaur>T-Rex Replica Delay (labeled as drive delay)
Loop 4- Catalinbread Semaphore Trem>
Loop 5- Fulltone Fat-Boost 2>

Micro 1 Loop Loop-Master- DLS Effects RotoSim>Red Witch Phaser>T-Rex Replica Delay (labeled as color delay)>

EP-Booster

The effects in the micro looper and the EP-booster are ran in the effects loop.

Underneath the board, there are two Voodoo Labs Pedal Powers powering everything, and at the very end of the signal flow is an Axcess Electronics line buffer to ensure that there is no signal loss.

Best part is, i can use a short patch cable to plug into the amp and send-in plugs, and completely bypass the effects loop wiring, enabling everything on the board to be ran in front of the amp!

Read more: http://ztalk.proboards.com/index.cgi?ac ... z1RP1PeRgS

Very cool board !!!

One question, any reason why the cables for the top pedals are not mounted underneath the board?

 

[AdamSG]

Here's my new board. It's actually a revamped version of a previous TT board I've had a couple of years. Had some pedals changed and some wiring changes.

Here is the signal flow:

Teese RMC8 Wah- First thing in the chain, not in any loops
Tuner- In a loop by itself, seperate from everything

The large, 5 loop Loop-Master has these effects running out front:

Loop 1- Analogman mini comprossor>
Loop 2- Fulldrive 2 Mosfet>Zendrive>
Loop 3- Klon Centaur>T-Rex Replica Delay (labeled as drive delay)
Loop 4- Catalinbread Semaphore Trem>
Loop 5- Fulltone Fat-Boost 2>

Micro 1 Loop Loop-Master- DLS Effects RotoSim>Red Witch Phaser>T-Rex Replica Delay (labeled as color delay)>

EP-Booster

The effects in the micro looper and the EP-booster are ran in the effects loop.

Underneath the board, there are two Voodoo Labs Pedal Powers powering everything, and at the very end of the signal flow is an Axcess Electronics line buffer to ensure that there is no signal loss.

Best part is, i can use a short patch cable to plug into the amp and send-in plugs, and completely bypass the effects loop wiring, enabling everything on the board to be ran in front of the amp!

Read more: http://ztalk.proboards.com/index.cgi?ac ... z1RP1PeRgS

Very cool board !!!

One question, any reason why the cables for the top pedals are not mounted underneath the board?

Honestly couldn't tell you. That was a decision Rooster made. From what I can gather from the wiring and the color coding, the compressor and fat boost are the first and last effects that are going in front of the amp, with the other things in the effects loop. May have something to do with that.

 

[Enjolras56]

My pedalboard is finally done! Masterfully mounted and wired by my friend Sam Hwang at Grayson's Tunetown in Montrose, CA (near Glendale)
The look and strategy is definitely 'inspired' by Dave Friedman's brilliant work=)

It's a 30x18 Trailer Trash board, powered by MXR CAE MC403 power supply

Signal path is: T1M buffer (underneath board)>Korg Pitchblack>Morley Maverick Mini Wah>Digitech Whammy IV>EHX Micro POG>Ibanez Airplane Flanger>MXR EVH Phase 90>CAL Holy Fire>CAL Mk4.23 Boost>Boss/Analogman modded TR-2>Amp (Marshall Vintage Modern).

Then FX Loop goes: Morley Mini Volume>MXR Smart Gate>Boss DD-20 (with T1M mini tap tempo)>EHX Holy Grail Nano. Yeah, it's not mounted in that line, but it looks neater this way!

Oh, and the black footswitch is my HO Attenuator dual volume footswitch.

 

[The Hoff]

^

Very clean Enjolras56. Nice board

 

[Enjolras56]

Thanks Hoff!!!

 

[Anonymous]

Here is my basic TT board...

 

[The Hoff]

Finally got around to taking some pics of my Trailer Trash board:

 

[Joeytpg]

that's a beautiful board Hoff!.... very organized

 

[The Hoff]

that's a beautiful board Hoff!.... very organized

Thank you sir

 

[kasperjensen]

that's a beautiful board Hoff!.... very organized

Thank you sir

Ah that would suit my Fender HRD so well!

 

[bluestrat77]

 

[ceton]

I have to say that I did something pretty much like what Aeroic did a few weeks back. It has lights and all integrated onto it and I have given it an additional coating which prevents the heat from going outside. Kind of like an insulation rig, I would say! has anyone tried the bose soundlink ? Any REVIEWS ON IT?

 

[Helixx Guitars]

Free bump.

 

[Laars]

Here is my Trailer Trash flat trash small board.