sahlomonic
Well-known member
Ordered a zero loss loop kit from Ceriatone to install on my 2204 (Ceriatone built). Apparently similar to the older Metro loops. Seems like an easy install, but I'm not getting sound.
Loop installed from treble wiper to Master input. Tapped power to the main board from the PI, and used a combo of 2W resistors to drop the voltage to the board (right now I'm at 281v but shooting for 300).
The amp had a passive effects loop prior, and I'm fairly sure I wired the jacks the same way, but man I'm not getting hardly any sound out of this thing - with or without anything plugged in the loop.
SO, until I can get pics uploaded, can someone point me to how I should have the Cliff jacks wired up for an effects loop?
Loop installed from treble wiper to Master input. Tapped power to the main board from the PI, and used a combo of 2W resistors to drop the voltage to the board (right now I'm at 281v but shooting for 300).
The amp had a passive effects loop prior, and I'm fairly sure I wired the jacks the same way, but man I'm not getting hardly any sound out of this thing - with or without anything plugged in the loop.
SO, until I can get pics uploaded, can someone point me to how I should have the Cliff jacks wired up for an effects loop?