Search results

Leave it, it shows your not a tan pant wall art / obsessed with resale value guy. Real wear is cool and shows you’ve dedicated time to playing.

Late to the party but the plan is to grow existing relationships with neighbors. Most have livestock, chickens, ect and are on a similar page. Existing food and water stores are covered for 3+ months, from there it would be a lotta eggs and well water. Immediate plan of attack would get every...

I’ve noticed the people selling boner pills and spells have not entered… speaks volumes on their character and charitably. Seriously though that’s cool as shit and speaks volumes on Rick as a person, as well as TM for setting this up.

Bumpski

Genalex Gold Lion KT-77 Quad. They have roughly 3hrs of time on them with about 1hr of that being burn in to check for bias drift. I just don’t like them in my JMP. No issues with matching. Yours for $205 delivered in the continental US.

I’m in for two…

They’re fine as is. Only thing I might do is tape over the jacks or any holes to keep dust/ creatures out. If it’s in an enclosed container maybe some desiccant packs

I believe they cut wattage in half every click. So it would be 0=100w -4=50w -8=25w -12=12.5w -16=6.25-0w. Just remember most that Marshall cranked puts out about 180watts, so doubble the above wattage numbers if it’s cranked.

Given this is mostly forum leans heavy towards 80’s and 90’s metal. I’d say Marshall and mesa boogie. If you collected the numbers I bet the most prolific amp here is nmv and mv Marshall’s, probably modded by 3-4 various builders here. Followed closely by mark 2/3/4’s, maybe dual rectos.

Probably a connection at or near the jack. Do you have a 9v? If so you can touch that to the cable to get cone movement.

Sounds like you might have nicked it, that stuff is really hard to strip correctly. I’d almost recommend peeling it vs using wire cutters. You should only need a grid resistor on the first stage.

Two things on the coax. Make sure you didn’t cut through that clear insulator. Also if you haven’t, move that 68k grid to the tube socket.

Like others have said depends on the audience and what you think is easy. My top choice would be shimmering highs by John norum but I don’t think that’s super easy to learn. March of the crabs is pretty easy and sounds cool. Maybe switch 625?

Nice, I didn’t see it in the earlier pics but you should try some shielded coax on both grids of v1. That should help with noise when adding more gain.

I do it like this… basically just the diodes tied in off the 100k with a switch to ground.

I like 2k7 with 0.68 bypass caps on both sides of v1. Might also try getting rid of the plate snubber, a 33k to the first grid and a 150k on the first plate. Maybe some diodes too, they’re pretty easy to install on a switch. Check your B+ to the pre as well. Might try bumping those voltages up...

I think your spot on with that. I had a ton of gain up front and was trying to tame it down leading into the TMB controls. For reference I had the deep sea mod into a PF tonestack which was just way too much gain on the first 2 stages. I’ll definitely try adding gain later as your explanation...

I agree with ya I hate waxes and edibles with a passion. Maybe look into a dry herb vaporizer. I haven’t smoked anything in forever so I don’t know what a good brand would be but they’re low on smell and don’t get you annihilated like normal weed, waxes, and edibles can.

Question for you all, with high gain circuits are there any best practices or areas to look at when getting to get a great gain taper? With my current circuits the guitar volume knob is basically an on off switch with little ability to roll down for a cleaner tone. For reference I see a lot of...