How very Gear Page - Lets see some Rig Talk pedal boards

  • Thread starter Thread starter RSRD
  • Start date Start date
Some killer boards here for sure... mine was a bit tidier before i started swapping pedals in and out but this is what i have settled on for now. Either the good ol stock SD-1 or TS-808 pushin the front end of the amp with the koko kicked in for leads. Flashback is in the loop. If that pedal wasn't so big, I am sure i'd be able to downsize to a smaller board. Wah not featured, need a true bypass one.

(crappy pic with phone camera)
 

Attachments

  • board.jpg
    board.jpg
    1.5 MB · Views: 3,927
Mine is more like a pedal pile ;)

It's pretty simple for now. These are the pedals for my Peavey Delta Blues 115. There is a noise gate in front of the amp. There is a chorus and delay in the effects loop. I use the amps lead channel for overdrive.
 

Attachments

  • DBPedals.jpg
    DBPedals.jpg
    954.7 KB · Views: 3,918
voodooradio1":1ehialj6 said:
Sorry for the shitty pics.

I take it that you are a cable into the amp kind of guitar player. I have a lot of respect for that. Sometimes I just turn all my effects off. It can be kind of liberating.
 
My current one, actually it hasn't changed in about a year - a new record for me!!

10170572046_dff897c35e.jpg
 
Mine is fairly basic:
LatestBoard.jpg


The Hardwire Chorus and Supernatural go into the FX loop of my Diezel D-Moll. Everything else goes into the front.
 
rbc":opfosu6c said:
voodooradio1":opfosu6c said:
Sorry for the shitty pics.

I take it that you are a cable into the amp kind of guitar player. I have a lot of respect for that. Sometimes I just turn all my effects off. It can be kind of liberating.
Actually there are quite a few pedals that I like. I was fortunate enough to find my Holy Grail guitar and amp toward the end of 2013, which has led me to really scrutinize any and everything that goes between the two. I have a test board set up that I have been rotating pedals in and out of. So far the only keepers are my Pitch black tuner, and an Xotic SL drive.
I am really pleased that my personal tone quest is over. It was a lot of fun and I got to try some really cool stuff, but it was also exhausting, and cut into playing time. Nice to be able to put all of my efforts back into creating music.
 
Death by Uberschall":1b5ktbl2 said:
Randy Van Sykes":1b5ktbl2 said:
Death by Uberschall":1b5ktbl2 said:
First pic is latest layout. The other two are original.
Pedal+Board+018.jpeg
Nice! Missing a Phase 90 though. ;)


Actually I'm not. :D

http://byocelectronics.com/board/viewto ... =8&t=17928

Phull+Phaser+010cp.jpg
I see, very nice then...my favorite as far as pedal selection. All great pedals there. :rock:

I have a whack of great pedals and I don't use pedals anymore, just mainly use a little delay after the amp...I'm wondering why I'm still holding onto them. Guess I think I may miss them someday.
 
Randy Van Sykes":onsstdo0 said:
Death by Uberschall":onsstdo0 said:
Randy Van Sykes":onsstdo0 said:
Death by Uberschall":onsstdo0 said:
First pic is latest layout. The other two are original.
Pedal+Board+018.jpeg
Nice! Missing a Phase 90 though. ;)


Actually I'm not. :D

http://byocelectronics.com/board/viewto ... =8&t=17928

Phull+Phaser+010cp.jpg
I see, very nice then...my favorite as far as pedal selection. All great pedals there. :rock:

I have a whack of great pedals and I don't use pedals anymore, just mainly use a little delay after the amp...I'm wondering why I'm still holding onto them. Guess I think I may miss them someday.
That board has been my favorite for a long time. Also, when I think of the coolest looking pedal, that phaser pops into my head immediately. Such a class setup :rock:
 
Erock":1rrbgts1 said:
Randy Van Sykes":1rrbgts1 said:
Death by Uberschall":1rrbgts1 said:
Randy Van Sykes":1rrbgts1 said:
Death by Uberschall":1rrbgts1 said:
First pic is latest layout. The other two are original.
Pedal+Board+018.jpeg
Nice! Missing a Phase 90 though. ;)


Actually I'm not. :D

http://byocelectronics.com/board/viewto ... =8&t=17928

Phull+Phaser+010cp.jpg
I see, very nice then...my favorite as far as pedal selection. All great pedals there. :rock:

I have a whack of great pedals and I don't use pedals anymore, just mainly use a little delay after the amp...I'm wondering why I'm still holding onto them. Guess I think I may miss them someday.
That board has been my favorite for a long time. Also, when I think of the coolest looking pedal, that phaser pops into my head immediately. Such a class setup :rock:

Thanks, it does just what I need it to. I am going to do some changes in the near future, I gotta fit a volume pedal in there somewhere. :confused:
 
Wired up by Dave Friedman, and featured in Guitar Player magazine, the "Rig Builders" issue.

 
Oops I forgot these ones.

FYI I only use the Whammy on the detune setting.
 

Attachments

  • MTZ.jpg
    MTZ.jpg
    147.6 KB · Views: 3,453
  • Detune.jpg
    Detune.jpg
    125.1 KB · Views: 3,450
Back
Top