VH4S cracks : Repared, but can't change channels anymore...

[billy_lost]

Cold Solder joint

I win! Try a different footswitch

True for the solder joint But all was fine with the FCB1010 before the repair

 

[billy_lost]

Why would you EVER use a Mesa product into a Diezel? why!?

That's an evidence : these are totally different sounds... Diezel amps are excellent, but are not THE answer... You know it, even if you prefer Diezel to all other brand you've tried

 

[Gsxrbusa]

Well.

My VH4S is back home. Problem? broken solderings... So...

I plug my guitar, and endly ear clear channel,

BUT ! I can't anymore change channels with my footcontroller... (this is a Behringer FCB1010)

I've tried several time to program program change, it doesn't work...

Program the amp to omni mode and check the Behringer

This! My Herbert would not recognize midi when I first recieved it. Switched it over omni mode and it has worked flawlessly ever since.

 

[billy_lost]

Well.

My VH4S is back home. Problem? broken solderings... So...

I plug my guitar, and endly ear clear channel,

BUT ! I can't anymore change channels with my footcontroller... (this is a Behringer FCB1010)

I've tried several time to program program change, it doesn't work...

Program the amp to omni mode and check the Behringer

This! My Herbert would not recognize midi when I first recieved it. Switched it over omni mode and it has worked flawlessly ever since.

None my VH4S, so I've "reset" it. But this time, it doesn't work... MIDI is Omni channel on VH4S and Channel 1 on my MIDI controller (behringer FCB1010), as before, but... It doesn't work...