Join me on a magical journey: Metro Plexi Superlead Build

  • Thread starter Thread starter FourT6and2
  • Start date Start date
FourT6and2

FourT6and2

Well-known member
This arrived today. Metro 100 watt 1959 Super Lead kit. I opted for the Mercury Magnetics transformers. I went with the O100JM-S, 2" stack output tranny and the regular Mercury power tranny that comes with the kit. Sozo caps and all that other good stuff. Here's a teaser while I finish uploading the rest of the photos from today:

:D

4e1b960ceebd7bbb78fcd7d2391ea74d-d3241hn.jpg
 
Good luck dude! I'll be checking in periodically.
 
Great choice on the kit. I have always wanted to this, you are a braver man than I am.

Hope you don't loose too much hair putting it together. :)

Looking forward to the reports :rock:
 
Too Cool Dude :thumbsup: , I have always wanted to do that, I will keep my eyes AND ears open for the progress, please show plenty of pics of the progress, and you other dudes, its a little early for clips,,I would not expect those until tomorrow!!
 
These suckers are like twice the size of the regular trannies. So I had make new mounting holes in the chassis. That was a pain in the ass...

2a99fa583f905ea4c9408747a5819474-d32438i.jpg


d75425cc01ae4e1653f0a51f0c53825b-d3243iq.jpg


267f9dcbc7299325d58eca7467118ee9-d3243rf.jpg


d2b6f7e63ab4e113e888cfff3358d5cc-d3244c1.jpg


e9e1c9c6715e3f676044ea79d91843eb-d3244ks.jpg
 
FourT6and2":hiz5scvk said:
These suckers are like twice the size of the regular trannies. So I had make new mounting holes in the chassis. That was a pain in the ass...

2a99fa583f905ea4c9408747a5819474-d32438i.jpg


d75425cc01ae4e1653f0a51f0c53825b-d3243iq.jpg


267f9dcbc7299325d58eca7467118ee9-d3243rf.jpg


d2b6f7e63ab4e113e888cfff3358d5cc-d3244c1.jpg


e9e1c9c6715e3f676044ea79d91843eb-d3244ks.jpg
Click to expand...

Big red iron :thumbsup: :thumbsup:
 
2a99fa583f905ea4c9408747a5819474-d32438i.jpg

Man, they just look sexy!!! Can't wait to see this amp come together. :thumbsup:
 
Nice :rock: I've been thinking about doing one of these lately. Boredom from being laid off :(
 
I'm in. Should be cool to watch. :thumbsup:

I'd like to think I have the skills to do something like that. It's the patience I might be lacking... :confused:
 
Great stuff, looking forward to watching the progress
those red MM's are really sexy :inlove: :inlove:
 
Outstanding! You doing any tweaks along the way, like cascading, or you just doing a normal build?
 
Cool stuff!!!! :rock:

I've been thinking about their JTM45 kit.

Love watching builds.


Jason
 
tweed":dna72t1f said:
Outstanding! You doing any tweaks along the way, like cascading, or you just doing a normal build?
Click to expand...

I will be building it to stock 1959 spec. with 100k feedback on the 4ohm tap. After the amp is broken in (probably around 75 hours) I'll throw a .68 cap for the presence and a .68 for v2 also change both caps out of v1 to .022. And I'll probably cut the bright cap. Then maybe a PPIMV or play around with cascading gain. But, I'll probably have see how it sounds first.
 
FourT6and2":3h4997tk said:
tweed":3h4997tk said:
Outstanding! You doing any tweaks along the way, like cascading, or you just doing a normal build?
Click to expand...

I will be building it to stock 1959 spec. with 100k feedback on the 4ohm tap. After the amp is broken in (probably around 75 hours) I'll throw a .68 cap for the presence and a .68 for v2 also change both caps out of v1 to .022. And I'll probably cut the bright cap. Then maybe a PPIMV or play around with cascading gain. But, I'll probably have see how it sounds first.
Click to expand...

I couldn't wait for the amp to break in before installing a PPIMV. Those things are ungodly loud :yes:
 
You must log in or register to reply here.
Back
Top