S
ShaneV
Member
Here's mine. The board itself is from http://www.LYTpedalboards.com the first pedal is a homemade splitter, the little black box by the input is a This1sMyne buffer, everything else is pretty clear.
charveldan
Banned
New member
Simple but effective.
Badronald
New member
The latest. The TS-9 is a Keeley Baked Mod. Favorite lead pedal.
Jack Napalm
New member
rsm
Well-known member
I have a few other pedals that I play around with in addition to these, but for not really being an effects guy, I've been digging effects of late. I think I'm becoming one of those effects guys. 
Little home board (not mounted) I use for my Vox Heritage amps:
Next up, I use this in front of my Fender amp (no loop), and it sounds decent direct into my Bose L1 System, not mounted ordered a gig bag for it. I will use the gorm shelf its sitting on if I need to travel with it, looking for an expression pedal for this and my big board. Pretty versatile and great sounding MFX, IMO:
...and my latest project, my big board - still testing it and working on the layout, measurements, etc. Need an expression pedal (I will probably get one to start, maybe a second later), Lava cable kit, and once it's wired up and working, look for a board and case...if I decide to keep it that is! After testing it with the Liverpool, next up is a Tech 21 PSA 1.1 both into the Bose L1. I've tried this in front of my Fender Deco Tone, and it was sweet. But I gotta get my head around this thing!
Little home board (not mounted) I use for my Vox Heritage amps:
Next up, I use this in front of my Fender amp (no loop), and it sounds decent direct into my Bose L1 System, not mounted ordered a gig bag for it. I will use the gorm shelf its sitting on if I need to travel with it, looking for an expression pedal for this and my big board. Pretty versatile and great sounding MFX, IMO:
...and my latest project, my big board - still testing it and working on the layout, measurements, etc. Need an expression pedal (I will probably get one to start, maybe a second later), Lava cable kit, and once it's wired up and working, look for a board and case...if I decide to keep it that is! After testing it with the Liverpool, next up is a Tech 21 PSA 1.1 both into the Bose L1. I've tried this in front of my Fender Deco Tone, and it was sweet. But I gotta get my head around this thing!
Bishop5150
Well-known member
NITROHOLIC
New member
EHX electric mistress > HBE tweed power screamer > spellbinder overdrive pedal (bobby Ds old one thats famous on youtube)> russian spy (russian muff on roids with 900000 tone combos) > bluebeard > megalith. this board brings the pain to people who arent into fuzz and sonic pound you in the ass.
bigbluesman
New member
Mine consists of 1 cry baby.
Eesakee
New member
Here's mine minus a few upgrades 
Mostly used for church.
Still waiting for my dang KOT from Mr. Analogman.
The cables with the gold jacks are my own handmade KES cables, made from MOGAMI 2524 and all gold plated G&H jacks. The best money can buy.
Cheers!
Mostly used for church.
Still waiting for my dang KOT from Mr. Analogman.
The cables with the gold jacks are my own handmade KES cables, made from MOGAMI 2524 and all gold plated G&H jacks. The best money can buy.
Cheers!
A
anagrama
New member
TeleBlaster
New member
As you can tell by the extra holes, we've had a few revisions along the way.
rlord1974
Active member
jshaffer23":8y4nfl0m said:Here's mine. All built by methe frame is 6061 aluminum and the top and bottom are 1/2" plywood. It has internal power for all the pedals and the back light for the logo in the front
Me likey. Well done!
T
tcaldn
New member
Current pedalboard & how each pedal is powered:
Dunlop dvp-1 volume pedal (passive)
Boss tu-2 chromatic tuner (direct to pedalboard brick, daisy chain)
Guyatone st-2 compressor sustainer (direct to pedalboard brick)
Guyatone sv-2 slow volume (direct to pedalboard brick)
BBE green screamer overdrive (daisy chain)
MXR m-86 classic distortion (daisy chain)
Electro Harmonix micro pog (ac adapter)
Option 5 destination rotation (ac adapter)
Digitech hardwire rv-7 stereo reverb (direct to pedalboard brick)
Boss dd-20 giga delay (ac adapter)
Maxon ad-999 analog delay (direct to pedalboard brick)
Ibanez lf7 lo-fi (daisy chain)
MXR m-133 micro amp (daisy chain)
Other misc pedals currently not in use:
Fuzzy Pedal fuzzy face
Digitech hardwire cr-7 stereo chorus
Previous pedals owned:
Boss dd-5 digital delay
Boss ds-1 distortion
Boss fz-2 hyper fuzz
Boss ce-5 chorus ensemble
Boss ph-3 phase shifter
Boss bf-3 flanger
Boss sd-1 super overdrive
Digitech whammy IV
Digitech xsw synth wah
MXR m-108 10-band eq
MXR m-101 phase 90
MXR m-103 blue box
ISP noise decimator
Ibanez fl9 flanger
Ibanez wd-7 weeping demon
Dunlop gcb-95 crybaby wah
Budda budwah wah
Behringer cc300 analog chorus
Behringer ut100 ultra tremolo
Behringer tp300 ultra tremolo/pan
Fulltone ocd overdrive/distortion
Vox v810 overdrive
Copilot FX antenna bit crusher
Copilot FX android ring modulator
Electro Harmonix big muff
Electro Harmonix little big muff
Electro harmonix nano small stone
Rocktron big crush compressor
DOD fx84 milk box compressor
DOD fx20b stereo phasor
DOD fx64 ice box stereo chorus
Pro Co turbo rat distortion
Dunlop dvp-1 volume pedal (passive)
Boss tu-2 chromatic tuner (direct to pedalboard brick, daisy chain)
Guyatone st-2 compressor sustainer (direct to pedalboard brick)
Guyatone sv-2 slow volume (direct to pedalboard brick)
BBE green screamer overdrive (daisy chain)
MXR m-86 classic distortion (daisy chain)
Electro Harmonix micro pog (ac adapter)
Option 5 destination rotation (ac adapter)
Digitech hardwire rv-7 stereo reverb (direct to pedalboard brick)
Boss dd-20 giga delay (ac adapter)
Maxon ad-999 analog delay (direct to pedalboard brick)
Ibanez lf7 lo-fi (daisy chain)
MXR m-133 micro amp (daisy chain)
Other misc pedals currently not in use:
Fuzzy Pedal fuzzy face
Digitech hardwire cr-7 stereo chorus
Previous pedals owned:
Boss dd-5 digital delay
Boss ds-1 distortion
Boss fz-2 hyper fuzz
Boss ce-5 chorus ensemble
Boss ph-3 phase shifter
Boss bf-3 flanger
Boss sd-1 super overdrive
Digitech whammy IV
Digitech xsw synth wah
MXR m-108 10-band eq
MXR m-101 phase 90
MXR m-103 blue box
ISP noise decimator
Ibanez fl9 flanger
Ibanez wd-7 weeping demon
Dunlop gcb-95 crybaby wah
Budda budwah wah
Behringer cc300 analog chorus
Behringer ut100 ultra tremolo
Behringer tp300 ultra tremolo/pan
Fulltone ocd overdrive/distortion
Vox v810 overdrive
Copilot FX antenna bit crusher
Copilot FX android ring modulator
Electro Harmonix big muff
Electro Harmonix little big muff
Electro harmonix nano small stone
Rocktron big crush compressor
DOD fx84 milk box compressor
DOD fx20b stereo phasor
DOD fx64 ice box stereo chorus
Pro Co turbo rat distortion
Attachments
N
nasticanasta
New member
base341
Active member
Here's my latest version.. Taken a while to get it here but I'm happy with the combo I have right now.
I just got some wire loom and wrapped my power cord, effects loop in and out, guitar in and footswitch cables together and shrink tubed the ends. Super clean..
I just got some wire loom and wrapped my power cord, effects loop in and out, guitar in and footswitch cables together and shrink tubed the ends. Super clean..
M
mjtripper
Member
I haven't made a change in a little over 6 months now - a new record for me!!
base341
Active member
mjtripper":aggdjhfi said:I haven't made a change in a little over 6 months now - a new record for me!!
Nice set up bro
Where did you get the covers for the pedal knobs?? Great idea, I'm sick of having to reset everything everytime I move it and pull it out of my case..
Death by Uberschall
Active member
Most current pic of mine since I added the Lovepedal Babyface Trem which is a great pedal.
M
mjtripper
Member
base341":3if7ht2s said:mjtripper":3if7ht2s said:I haven't made a change in a little over 6 months now - a new record for me!!
Nice set up bro
Where did you get the covers for the pedal knobs?? Great idea, I'm sick of having to reset everything everytime I move it and pull it out of my case..
Thanks, it took me a long time to get there but I've been very happy with my little creation. Those knob covers I made by cutting up old rubbermaid containers and then using the little stick on velcro dots to attach them to the knobs. I have a soft side padded bag for the board and snake and they keep the knobs from turning very very well. My setup time is crazy fast.
lester
Well-known member
#1
#2
#3
#2
#3