More Cameron CCV pics from today 8/23/11

[FourT6and2]

Dear Rig Talk,

When I brought up the heater wiring, it was not my intention to "shit on" Mark Cameron, the CCV or any other entity involved. I was simply pointing out that the heater wiring's lead dress was a bit... off. And I even said (in that very first post) that if the amp was using DC heaters, that it was not an issue. It has since been confirmed that the amp does, indeed, run DC heaters. So how those wires are twisted does not matter.

The people harping on the fact that I brought it up to begin with are doing so by insinuating that it was my intention (which is was not) to cause drama in this thread. False. I have nothing but respect for Cameron, Brad, Friedman, et al. And they most certainly know more about building an amp than I.

Those of you making snide and sarcastic comments when people question the quality of products being sold to them, need to understand they are causing more harm than good.

Bottom line: CCV has DC heaters. Lead dress on the heaters is a non-issue. Carry on.

XOXO with sugar and syrup and a little reach around on top.

FourT6and2

 

[david simpson]

Would read again..

 

[jerrydyer]

Dear Rig Talk,

When I brought up the heater wiring, it was not my intention to "shit on" Mark Cameron, the CCV or any other entity involved. I was simply pointing out that the heater wiring's lead dress was a bit... off. And I even said (in that very first post) that if the amp was using DC heaters, that it was not an issue. It has since been confirmed that the amp does, indeed, run DC heaters. So how those wires are twisted does not matter.

The people harping on the fact that I brought it up to begin with are doing so by insinuating that it was my intention (which is was not) to cause drama in this thread. False. I have nothing but respect for Cameron, Brad, Friedman, et al. And they most certainly know more about building an amp than I.

Those of you making snide and sarcastic comments when people question the quality of products being sold to them, need to understand they are causing more harm than good.

Bottom line: CCV has DC heaters. Lead dress on the heaters is a non-issue. Carry on.

XOXO with sugar and syrup and a little reach around on top.

FourT6and2

not you bro, some e-cock that chimed in later.

 

[ejecta]

Would read again..

 

[ejecta]

Dear Rig Talk,

When I brought up the heater wiring, it was not my intention to "shit on" Mark Cameron, the CCV or any other entity involved. I was simply pointing out that the heater wiring's lead dress was a bit... off. And I even said (in that very first post) that if the amp was using DC heaters, that it was not an issue. It has since been confirmed that the amp does, indeed, run DC heaters. So how those wires are twisted does not matter.

The people harping on the fact that I brought it up to begin with are doing so by insinuating that it was my intention (which is was not) to cause drama in this thread. False. I have nothing but respect for Cameron, Brad, Friedman, et al. And they most certainly know more about building an amp than I.

Those of you making snide and sarcastic comments when people question the quality of products being sold to them, need to understand they are causing more harm than good.

Bottom line: CCV has DC heaters. Lead dress on the heaters is a non-issue. Carry on.

XOXO with sugar and syrup and a little reach around on top.

FourT6and2

The pic I posted wasn't aimed at you but the the overall general direction Cameron threads tend to turn into. No offense meant on my end just poking fun in general. I actually thought you did the right thing in bringing it up.

 

[Anonymous]

Dear Rig Talk,

When I brought up the heater wiring, it was not my intention to "shit on" Mark Cameron, the CCV or any other entity involved. I was simply pointing out that the heater wiring's lead dress was a bit... off. And I even said (in that very first post) that if the amp was using DC heaters, that it was not an issue. It has since been confirmed that the amp does, indeed, run DC heaters. So how those wires are twisted does not matter.

The people harping on the fact that I brought it up to begin with are doing so by insinuating that it was my intention (which is was not) to cause drama in this thread. False. I have nothing but respect for Cameron, Brad, Friedman, et al. And they most certainly know more about building an amp than I.

Those of you making snide and sarcastic comments when people question the quality of products being sold to them, need to understand they are causing more harm than good.

Bottom line: CCV has DC heaters. Lead dress on the heaters is a non-issue. Carry on.

XOXO with sugar and syrup and a little reach around on top.

FourT6and2

Dude! You didn't do anything wrong... Everything you said was correct and I wouldn't be concerned about other's perceptions of your motives, which were clearly to be helpful...

Steve

 

[Anonymous]

That is AWESOME! I missed the heater wires first time I looked...

Steve

 

[Rogue]

Dear Rig Talk,

When I brought up the heater wiring, it was not my intention to "shit on" Mark Cameron, the CCV or any other entity involved. I was simply pointing out that the heater wiring's lead dress was a bit... off. And I even said (in that very first post) that if the amp was using DC heaters, that it was not an issue. It has since been confirmed that the amp does, indeed, run DC heaters. So how those wires are twisted does not matter.

The people harping on the fact that I brought it up to begin with are doing so by insinuating that it was my intention (which is was not) to cause drama in this thread. False. I have nothing but respect for Cameron, Brad, Friedman, et al. And they most certainly know more about building an amp than I.

Those of you making snide and sarcastic comments when people question the quality of products being sold to them, need to understand they are causing more harm than good.

Bottom line: CCV has DC heaters. Lead dress on the heaters is a non-issue. Carry on.

XOXO with sugar and syrup and a little reach around on top.

FourT6and2

It's a Cameron thread. Kind of like an AxeFX or Dumble thread on TGP.

 

[Anonymous]

Dear Rig Talk,

When I brought up the heater wiring, it was not my intention to "shit on" Mark Cameron, the CCV or any other entity involved. I was simply pointing out that the heater wiring's lead dress was a bit... off. And I even said (in that very first post) that if the amp was using DC heaters, that it was not an issue. It has since been confirmed that the amp does, indeed, run DC heaters. So how those wires are twisted does not matter.

The people harping on the fact that I brought it up to begin with are doing so by insinuating that it was my intention (which is was not) to cause drama in this thread. False. I have nothing but respect for Cameron, Brad, Friedman, et al. And they most certainly know more about building an amp than I.

Those of you making snide and sarcastic comments when people question the quality of products being sold to them, need to understand they are causing more harm than good.

Bottom line: CCV has DC heaters. Lead dress on the heaters is a non-issue. Carry on.

XOXO with sugar and syrup and a little reach around on top.

FourT6and2

It's a Cameron thread. Kind of like an AxeFX or Dumble thread on TGP.

AxeFX has parameters to simulate any kind of heater twisting!

Steve

 

[jerrydyer]

Dear Rig Talk,

When I brought up the heater wiring, it was not my intention to "shit on" Mark Cameron, the CCV or any other entity involved. I was simply pointing out that the heater wiring's lead dress was a bit... off. And I even said (in that very first post) that if the amp was using DC heaters, that it was not an issue. It has since been confirmed that the amp does, indeed, run DC heaters. So how those wires are twisted does not matter.

The people harping on the fact that I brought it up to begin with are doing so by insinuating that it was my intention (which is was not) to cause drama in this thread. False. I have nothing but respect for Cameron, Brad, Friedman, et al. And they most certainly know more about building an amp than I.

Those of you making snide and sarcastic comments when people question the quality of products being sold to them, need to understand they are causing more harm than good.

Bottom line: CCV has DC heaters. Lead dress on the heaters is a non-issue. Carry on.

XOXO with sugar and syrup and a little reach around on top.

FourT6and2

It's a Cameron thread. Kind of like an AxeFX or Dumble thread on TGP.

AxeFX has parameters to simulate any kind of heater twisting!

Steve

does it have parameters to simulate the need to send it back for repairs?

 

[ejecta]

That is AWESOME! I missed the heater wires first time I looked...

Steve

 

[Chubtone]

I wouldn't want you to break an e-hip

Look Steve, you know I dig you in a RT man-crush sort of way, and you know I have your back in any sort of e-fight........ but that line up there is freaking funny.

Total sig material. Mary just brought it.

 

[Anonymous]

I wouldn't want you to break an e-hip

Look Steve, you know I dig you in a RT man-crush sort of way, and you know I have your back in any sort of e-fight........ but that line up there is freaking funny.

Total sig material. Mary just brought it.

I completely agree. We made up and e-hugged after he showed a sense of humor...

Steve

 

[joepete77]

.
When I brought up the heater wiring, it was not my intention to "shit on" Mark Cameron, the CCV or any other entity involved. I was simply pointing out that the heater wiring's lead dress was a bit... off. And I even said (in that very first post) that if the amp was using DC heaters, that it was not an issue. It has since been confirmed that the amp does, indeed, run DC heaters. So how those wires are twisted does not matter.

The people harping on the fact that I brought it up to begin with are doing so by insinuating that it was my intention (which is was not) to cause drama in this thread. False. I have nothing but respect for Cameron, Brad, Friedman, et al. And they most certainly know more about building an amp than I.

Those of you making snide and sarcastic comments when people question the quality of products being sold to them, need to understand they are causing more harm than good.

Bottom line: CCV has DC heaters. Lead dress on the heaters is a non-issue. Carry on.

XOXO with sugar and syrup and a little reach around on top.

FourT6and2[/quote]

 

[NS10Fan]

You know, the fact that this thread has had 1,400 views in just over a day must put a huge grin on both Brad's and Rob's faces. Don't tell me there's no interest in the CCV!

you misspelled drama...it doesn't have a C or a V in it. This forum is hilarious on a consistent basis.

 

[EXPcustom]

Some of you guys need to twist a doobie.

 

[chumbucket]

Are there any pictures of molex connectors or ribbon cables that I can bitch about?

 

[155]

all the talk of these amps has got me totally disintrested! couldnt care less, thanks guys !

 

[Anonymous]

Are there any pictures of molex connectors or ribbon cables that I can bitch about?

Molex connectors are cool - nothing to bitch about...

Steve

 

[RoidRage]

Ohh That's so fucking funny!!!